| Product Advantages |
| ·Suitable for all kinds of wall |
| ·High pull-off strength for a higher security of the system |
| ·Low thermal conduction addition value to avoid thermal bridge |
| ·Galvanized layer on the steel nail to protect the nail from alkali |
| |
| Remarks |
| 1)Start drilling after sufficient hardening of the glue (min 24h later) |
| 2)Clean the drilled hole |
| 3)Make sure that not any damage to the thermal insulation layer or substrate were made during fixing the anchor |
| 4)Make sure that the depth of drilling is deeper than 40mm and the anchoring depth is min. 30mm |
| 5)The top of anchor can not be protrudent out of the surface of the thermal insulation layer |
| 6)For the tile system the anchor must be fixed through the thermal insulation layer, the alkali-resistant glass-fibre-mesh and fresh base coat; for the plaster system the anchor can fixed directly through the thermal insulation layer |
| |
| Application environment |
| Temperature:5°C~35°C |
| Avoid raining, high temperature and frost |
| Avoid direct sunlight and class 5 wind |
| |
| SA EPS system is a lightweight, low density system employing expanded polystyrene insulation with adhesive and mechanical dowel fixings |
| Dowel is a part of SA - external wall Insulation systems of external building walls,The finishing coat can be tile |
| |
| |
