IEC 60112 Tracking Index Tester

Model:	Auto-LD
Brand:	Auto
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Laboratory Instrument
Label:	tracking index teste , tracking index test , comparative tracking
Price:	US $3500 / set
Min. Order:	1 set

Inquire Now

Product Description

Product details :

The AUTO LeakageTracking Test Machine / Tracking Index Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. Inside the well lit cabinet, a test specimen is placed on a glass plate and two platinum electrodes are lowered onto the top surface.

A gauge block is supplied with the instrument to ensure the electrodes have the proper distance between them. The table height is easily adjustable to ensure the proper angle of the electrodes and height of drops. The rest of the test is controlled from outside the test chamber with the door closed.

The voltage,limiting current, drip rate and number of drips are all set on the control panel. An operator should observe the test to see if a flame ignites. The instrument sounds an alarm if there is a tracking failure of at least two seconds.

Technical parameters:



Electrode Material	The electrode caput of brass-platinum
Electrode Distance	4.0mm±0.1mm,60±5°angle
Test Voltage	100~600V adjustable, displayed value: r.m.s
Test Current	Current limiting 1A±0.1A adjustable,
	displayed value:r.m.s, tolerance of 1.5%
Electrode Dimensions	width: 5mm±0.1mm,
	thickness: 2mm±0.1mm,
	length >12mm,
	end chisel-edge angle : 30°±2°,platinum.
Electrode Pressure	1.00N±0.05N
Dripping Nozzle	outer diameter: 0.9mm~1.2mm for solution A
	0.9mm~3.45mm for solution B
Dripping Interval	0-99 seconds (adjustable),the time for 44-55/1cm³(adjustable)drops to fall on the specimen shall be (30±2)min
Height Drops	30-40mm±5mm(adjustable)
Control	Using single chip microcomputer + touch screen control
Volume Of Chambe	>0.5m³, black interior

Power Supply	800VA ,220V, 48-60Hz