IEC60695-11-5 Needle Flame Tester

Model:	AUTO-ZY
Brand:	AUTO
Origin:	-
Category:	Electronics & Electricity / Electronic Instrument / Laboratory Instrument
Label:	Needle flame tester , Needle flame test eq , Needle flame tester
Price:	US $3500 / set
Min. Order:	1 set

Product Description

IEC60695-11-5 Needle Flame Test Apparatus

1.Reference to IEC60695-11-5
2.One button operation
3.Touch screen control

1.Introduction

Reference to IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005..
Used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics
With predetermined size (Φ 0.9 mm) needle burner, in 45 °angle burning product,measure the fire risk by product light-off or holde burning time

2.Technical parameters:

Needle burner	inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel
Burner angle	0,°20°, 45° (adjust flame height)
Thermocouple	Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C
Burning time	0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time	0-999.9 s ± 0.1 s, automatic recording, manual timeout
Flame Height	12mm ± 1mm (with height measurement instruments)
Flame Gas	butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)
Temperature Test Range	0~1000°C
Flame Temperature Requirements	from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
Standard Copper Block	4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
Test process	automatic control, independent convulsions
Chamber	≥0.5m3
Size	W1100mm×D700mm×H1300mm
Control	Using single chip microcomputer + touch screen control
Consult standard	GB/T5169.10-2006 , IEC60695-11-5:2000,UL746A
Power Supply	800VA ,220V, 48-60Hz