Flange inspection machine for h-beam flange correction. After the h-beam welding process, under the action of welding application, h-beam of the wing deformation, must be correct to use. This equipment is mainly used for after soldering of h-beam and wing plate correction of T section steel. Is the production of h-beam of indispensable important equipment.
Specifications and configuration 1. Flange width: 200-800 - mm (2) the thickness of the flange: 6-30 mm correction (30 mm thick plate is refers to the flange width > 600 mm) 3. The web height: 200-1500 - mm 4. Straightening speed: 4500 mm/min 5. The main drive motor power: 7.5 kw 6. H-beam material: Q235 this machine by the bearing, the fuselage, left column, right column, bearing pressure gun, main transmission system, screw, reducer, pointer device and electric control system composition. Bearing adopts channel steel compound, compact structure, the fuselage combined T slot, left and right vertical cylinder adopts box-type structure, adopt bevel gear transmission reducer, pressure screw adopts rectangular thread screw, press roll and transmission roll material USES 40 cr, surface hardening treatment, wear resistance, long service life.
