Application:

 

It is apply to overhaul and install the power equipments which are running as energized such as transformer oil, turbine oil, switch oil and mutual inductor oil. It is especially apply to regenerate and purify the seriously deteriorated insulating oil, turbine oils used in electrical appliance manufacture, power station, railway transformer substation, etc… as well as performing dehydration, degassing and vacuum drying works.

 

 

 

The Zhongneng Oil regeneration system (Series ZYB) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYB system provides regular oil purification such as degassing, drying and particulate removal but also can remove polar material, acidity, sludge, hydrocarbons, other soluble oil decay products and discoloration.

 

 

 

This is accomplished by the use of high vacuum degasification technology, special regeneration tank application and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new so as to protect the electrical equipments working safely and normally.

 

 

 

 This machine can be operated with all the systems in it, also can be operated with partial systems in it optionally, it’s very popular because of its high speed filtering, high efficient filtering, high quality, safe operation, etc…

 

 

 

Features:

 

 

1. Besides the common vacuum oil purifier’s function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility.

2.  Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so dose the regeneration oil system, and also they can work at the same time.

 

 

 

3.  The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration.

 

4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly

 

5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.

 

6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power

 

 

 

7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.

 

8. Specially applied to vacuum oiling and drying for power transmission equipments.

 

9. The oil of any grades can be treated either on- or off-load.

 

10. Special oil pump designed with lower noise.

 

11. For special application, the operation can be controlled by P.L.C (Programmable Logic Controller) as option.

 

12. This Oil purifier can be made in mobile type with trailer, hermetical, canopy-covering, open and frame style, etc… according to customer’s special requirements

 

 

 

Advantages:

 

It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, PH value. Meanwhile, it improves the voltage-withstand value through filtering the polarity materials like free carbon, deep oxides and so on.