TB0330 Silicone Rubber For Coating Textiles is a 2-part liquid silicone with high transparency, great tear-strength and strong bonding force. This product portfolio is complemented by water-based finished silicone rubber dispersions and a large number of special additives for customizing our standard grades. Textile coaters will thus find the perfect solution for every application at HY SILICONES.

 

 

Application:

It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.

 

 

Specification:

-Low shrinkage(＜0.1%)

-Good skid-proof effect and high adhesive strength

-Wear proof, wash-resistant, high temperature resistant

-Non-toxic and odorless, food grade silicone

-High transparency and good tear-strength.

 

 

Datasheet:

Model	TB0330
Appearance	Transparent
Hardness(shore A)	30±2
Mix ratio(A:B)	1:1
Viscosity(mPa.s)	60000~100000
Tensile strength(Mpa)	4.6
Tear-strength(KN/m)	19±2
Elongation(%)	360
Pot life/working time(25℃	According to your requirements
curing time(100-120℃)	According to your requirements

 

 

Operation introduction:

1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.

2,It can be cured by heating with 100~150 degree, the curing time will be 5~10 minutes.

 

 

SHELF LIFE:

8-10 months when stored under 24℃ in original unopened packages.

 

 

PACKAGE:

If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.

Any more information, pls feel free to contact Christy at any time.
TEL:0086-755-89948006
MOBILE:0086-18938867547
EMAIL:hyxj@szrl.net