DSLAM5024G is a special pizza box designed for outdoor application with the physical depth about 320mm and the operating temperature up to 60°C . It terminates all the ATM circuits and converts traffic directly to deliver the most popular broadband IP services.

DSLAM5024G offers better bandwidth utilization, ease of use,as well as the low-cost advantage and provides the least initial investment solution for internet service providers who want to start providing broadband service in a low subscriber density location.

DSLAM5024G is compliant with ITU G.992.5, G.992.3,G.992.1, and backwards compatible with early version of ADSL.Its maximum downstream/upstream rate is up to 24/1.2Mbps and maximum reach distance is over 6Km. It is most suitable to provide high speed Internet access on existing copper twisted pair telephone lines..

With the highly compact (1U height) and temperature-hardened design, simple installation and easy adaptation to local POTS/ISDN splitter requirements,DSLAM5024G is an ideal solution for Triple-play requirements deployed in indoor and outdoor enclosures..

ADSL2+ Interfaces:

 24 ADSL/ADSL2/ADSL2+ Ports with splitter built
Supports ANSI T1.413 Issue 2, ITU G.992.5, G.992.3,G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)
Provides optimal rate/reach performance
Rates up to 24.0 Mbps
Distance up to 6.0 Km
Multimode (automatic modulation detection)
 Supports packets transmit and receive statistics report
 Bandwidth Management control on each port at 32kbps interval
Extended power management capabilities to optimize power consumption for each application

Management
Web-based management
 SNMP-based GUI EMS
Local RS-232 CLI
Remote in-band SNMP/TELNET management
Firmware upgradeable via FTP or TFTP
Protocol Support
 IGMP snooping/ GMRP/ GVRP/ LACP
SNMP/UDP/IP/MAC/Ethernet

System Features:

 2 10/100/1000 BASE-TX ports, one for uplink and another one for cascade
Support up to 8 units to be cascaded
SNMP Management Agent and MIB II
TFTP
BOOTP Client, Boot Server
 IP packet size 64 byte to 1522 byte
PPPoE Intermediate Agent
 DHCP Relay Agent
8 VCs per ADSL port
Support multiple PVC QoS configuration
128 MAC address per ADSL port
 24*128 MAC address
 Bridging
     1. Ethernet Bridging – Broadcast, Flooding/ Dropping.
     2. VLAN bridging
         A. 512 VLAN support
         B. Static VLAN
         C. VLAN Stacking
         D. VLAN Trunking
Multicast
     1. Up to 256 multicast addresses
     2. IGMP v1, v2, v3
     3. Multicast VLAN mapping
         A. Independent VLAN multicast (IVM)
         B. Shared VLAN Multicast (SVM)
     4. handle PPPoE Encapsulated IGMP
Security
     1. Throttling Control
     2. Sticky Bridge Ports
     3. MAC Address Access Control List
     4. IP Address Access Control List
 Inter-Working
     1. IPoA to IPoE Tunneling
     2. PPPoA to PPPoE inter-working
QoS
     1. Input Rate Limiting (IRL) on a per-AAL5 Interface
     2. Output Rate Limiting (ORL) on a per ATM-port and Ethernet basis
     3. Rate Limiting

Hardware Configuration
2 RJ45 for Uplink and Cascade

1 TELCO-50 connectors for 24-port ADSL/ADSL2/ADSL2+
1 TELCO-50 connectors for phone line
1 RJ45 interface for Local Management
Input Power
AC Power Model: 90VAC ~ 260 VAC, 50-60 Hz
 DC Power Model: -40VDC ~ -60 VDC
Power Consumption: 75 watts
Operation Parameters
Operating Temperature: -10 to 60°C
Storage Temperature: -30~+85°C
Operating Humidity: 5% to 95% non-condensing

 Operating Altitude: -200ft.to +15,000ft
Reliability: MTBF 140,000 hrs minimum
Physical Specification
Dimensions: 440mm(W) x 320mm(D)in x 44.5mm(H) 
Weight: 6.0Kg