DSLAM5024 is a 24ports IP based ADSL2+ DSLAM with splitter built-in. It terminates all the ATM circuits and converts traffic directly to deliver the most popular broadband IP services.

DSLAM5024 offers lower port count DSLAM available in the market place. It provides the least initial investment solution for Service Providers who want to start providing high speed internet access service in a low subscriber density location on existing copper twisted pair telephone lines.

Sino-Telecom’s IP DSLAM technology is also backwards compatible with early version of ADSL.DSLAM5024 is compliant with ITU G.992.5, G.992.3, G.992.1, the G.992.5 ADSL2+ technology is an enhanced version of the ADSL technology which provides cross-talk free deployment. The unit features maximum downstream rate up to 24 Mbps and maximum reach distance over 6.5 Km.

With the highly compact (1U height) and temperaturehardened design, simple installation and easy adaptation to local POTS/ISDN splitter requirements, DSLAM5024 is an ideal solution for Triple-play requirements deployed in indoor and outdoor enclosures.

Features

Supports ANSI T1.413 Issue 2, ITU G.992.5, G.992.3,G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)
One 10/100 BASE-TX ports for uplink with autonegotiating
24 ADSL2+ Ports
Support Annex M(optional)
Support 802.1P, STP
Support 802.1Q
Multimode (automatic modulation detection)
Supports packets transmit and receive statistics report
Support NAT(optional)
Support DHCP server(optional)
Support DHCP relay
Support multiple PVC QoS
Provides optimal rate/reach performance
Higher rates by limiting reach (up to 24.0 Mbps)
Longer reach by reducing rate (distance up to 6.5 Km)
Bandwidth Management control on each port at 32kbps interval.

Network Configuration Modes
 Gateway
Router
 Bridge

Management
 Web based management
SNMP-based GUI EMS
Local RS-232 CLI
 Remote in-band SNMP/TELNET management
Firmware upgradeable via web, FTP or TFTP

Hardware Configuration
2 RJ45 for Uplink
1 TELCO-50 connectors ( including 24pairs phone line) link to PSTN
1 TELCO-50 connectors ( including 24pairs phone line) link to ADSL2+ users
1 DB9 male (Null Modem) for Local Management

Physical Specification
Dimensions: 440mm(W) x 325mm(D)in x 44.5mm(H) 
Weight: 6.0Kg

Input Power
AC Power Model: 90VAC ~ 260 VAC, 50-60 Hz

  DC Power Model: -40VDC ~ -60 VDC
 Power Consumption: 40 watts

Operation Parameters
Operating Temperature: 0 to 50°C
Storage Temperature: -40~+80°C
Operating Humidity: 5% to 95% non-condensing
 Operating Altitude: -200ft.to +15,000ft
 Reliability: MTBF 140,000 hrs minimu