High pressure fine fog misting nozzle

Products Information

1. FD series high pressure fog mist nozzles have guide vane inserted and have a anti-drop equipment.
2. Under the pressure of 20-70KG(290PSI-1015PSI), the liquid flows in a high speed forming a centrifugal vortex In the vanes, then spray the fine droplets from the orifice.
3. This kind of nozzle can be used in artificial fog, disinfection, cooling, humidifying etc.
4. As the wide use in artificial fog industry, it's also called artificial fog nozzle, cooling fog nozzle.
5. Material of Nozzle's body: stainless steel

Feature

1. Without air's supplementary, system device is simple.
2. Fog's droplets' diameter ranges from 3-70UM, and spray fully.
3. Energy and water saving, low cost and good effects.
4. Non-blocking and anti-drop.
5. Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.

Application

1. Textile workshop humidification
2. Stock farm cooling sterilize
3. Man-made fog sight
4. Vegetable retain freshness
5. Dust removing