Bakelite injection screw barrels
 

• Specification

Screw diameter: Ø12-300MM L/D:15-55
Barrel diameter:  Ø25-500MM      Length:300-1000MM

• Material

38CrMoAlA(JIS SACM645)

Cr12MOV(JIS SKD-11) 
4Cr5MoSiV1(JIS SKD-61) 
42CrMo(AISI 4140)

9Cr18MoV
Stainless steel,etc.

• Parameter

Roughness of the surface:Ra0.4um

Linearity of the screw: ≤0.015mm

Linear axis limit: ≤0.02mm

Fragility of Nitration:≤Two class

Nitriding treatment(120 Hours)

Depth of Nitrided Layer: 0.5-0.8 mm

Hardness of Nitrided Layer: 900-1020Hv (HRC56°-65°)

• Feature

The most important design requirements for bakelite screw barrel.
The injection screw has no zone of compression.
The cylinder should be heated by oil.
The screw should be made of wear-resistant steel with a surface hardness of 60 HRC.
The cylinder should be also wear-resistant (bimetallic cylinder).
Electric heating cartridges can be used to heat the mould