F21-12D radio remote controls used for bridge crane and overhead crane,easy to operate to keep workers safety.

Products application:

 MD double speed electric hoist or double speed electric chain hoist with  hook,monorails ,double hook /single speed hoist crane,

and used for the industrial remote control which are under 25 connections

Brief Introduction

Transmitter                       size:239*65*65mm                           weight:255g

Receiver                           size:331*160*140mm                       weight:1200g

Specification:

control distance :                                                         up to 100m

unique code :                                                               over 4.3billon unique ID codes .

temperature :                                                               -35°C~+80°C

Enclosure protection class :                                          IP65

Transmitter power:                                                       DC3v

Receiver powder :                                                       AC 380v/ 36v/220V or DC12V/24V

output capacity:                                                           Full sealed relay output with 5 amperes 

Standard configuration:               

                          One transmitter ;

                          One receiver;

                          One 1m cable connect with receiver

                          One operation and maintain manual . 

Products Features: 

* 12 Dual speed push button +one EMGS button+one START button+one SWITCH key

* control points are up to 25

*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.

*with the Rotate key switch to guarantee the safety.

 

*set the internal functions by computer interface

*up/down ,east/west , south/ north push button can be set mutual inhibition or not .

*power button can be set start,speed up,jump strokes, ordinary etc.

*spare 1-2 ,3-4 key can be set ordinary, interlock,jump strokes,switch etc.