The DeWalt wet tile saw with slide table are used for cutting tiles and a number of other building materials including ceramic, natural stone and composite material,

interior and exterior tiles.
The depth of a building tile cut with this saw ranges from 20mm to 60mm. Due to the fixed head and patented sliding bed, the D240 is extremely easy to use. Whether

rip, bevel or plunge cutting, the saw is quick and easy to adjust and extremely accurate.
Due to its fixed head and removable water trays and legs, the saw is compact and lightweight to transport.
This range has the following features:
Stainless steel rail system is intergrated into the tile saw frame, ensuring accurate cuts;
Cantilevering rail / cart sytem allows for 610mm ripping capacity;
Relatively low weight allows one person to transport and set up saw;
Intergrated 45 / 22.5 degree feature for quick angle cuts;
Plunge feature allows the user to make quick plunge cuts for electrical outlets;
Dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise over-spray and mist;
Rear and side water attachments can be placed on the tile saw to catch overspray - keeping the water in the pan;
Removeable cutting cart for easy cleaning of tile saw;
Edge guide with two positions (90 and 45 degree) allows easy line up of corner cuts.
These wet tile saws with slide table includes a cutting disc, side and rear water collector and hex key. The range has the following specifications:
Power Input: 1,6 Watts.
Wheel Diameter: 250mm.
No Load Speed: 42/min.
Depth of cut: 95mm.
Max. Crosscut Capacity at 90° : 610mm.
Max. Crosscut Capacity at 45° : 450mm.
Width: 690mm.
Weight: 32kg.
Length: 860mm.