The DeWalt D25712K is a full featured SDS-Max combination hammer drill which is ideal for drilling anchor fixing and through holes in concrete and masonry from 12 to

48 mm in diameter and core drilling up to 125 mm.
The Active Vibration Control system incorporating a counterbalance mass and floating handle delivers extremely low vibration and has complete Torque Control, a

patented 2 step clutch allows the user to select one of two settings for different diameter drill and core bits providing the maximum level of protection in all

drilling applications.
The D25712K also has electronic variable speed and impact energy control, a lock-on switch for chipping, rotation-stop for demolition applications in brick, masonry

and light chasing in concrete and brush wear and service indicators.

Specifications
Power Input: 13 Watts
Power Output: 840 Watts
Load Speed: 137-275 rpm
Blows per Minute: 1260-2520 bpm
Impact Energy: 2-14J
Tool Holder: SDS-Max
Max. Drilling Capacity
Concrete: 48mm
Breakthrough bit: 80mm
Core bit: 125mm
Weight 9.1kg
Length 528mm
Height 268mm
Width 116mm
Hand/Arm Vibration: 7.8 m/s2
Uncertainty K 1 (Vibration): 1.5m/s²
Hand/Arm Vibration - Chisel: 7.2m/s²
Uncertainty K 2 (Vibration): 1.5m/s²
Sound Pressure: 95dB(A)
Uncertainty K 1 (Sound): 3dB(A)
Accoustic Pressure: 106dB(A)
Uncertainty K 2 (Sound): 4dB(A)
Standard Equipment: Multi-position side handle, heavy-duty carrying case