DRK0097AUniversal Material Testers
1, the scope for high-load test floor two-column series.
2, capacity up to 50kN.
3, robust heavy-duty chassis to meet the high-load applications.
4, widely used in high-strength metals and alloys, advanced composites, aerospace and automotive structures, bolts, fasteners and steel plates.

ApplicableRange
Used for the strength performance test of tensile,bursting,shearing,peeling,compressure, bending, tearing, creeping, elasticity, joint seem, ect. For all kinds of materials.

Instrument characteristics

1、Rack design life of more than 30 years
(1)high-strengthmaterials, solid rigid frame
Pre-loaded bearings and precision ball screw, thick beams and base beams, and lower degree of belt tension, can minimize the energy stored during the test, resulting in better test performance and to obtain more accurate modulus and strain values​​

(2)excellentprecision on the rail and bending
In the implementation of the axial test, only with a stable, precise rigid rail system to get accurate results of stress and strain to ensure that the sample under load by the lateral force of the impact to a minimum.

(3)greater imports of advanced servo motor and drive system, higher reliability.

Beginning of the test motor to power the acceleration rate is higher, the operation cycle of the test cycle faster, dual-belt system to keep pace with ball screw movement, and orientation and help to eliminate the beam tilt in the system and precise positioning。
2、The third generation of embedded systems based on digital signal processing (DSP) control technology

(1)high-speed, low vibration Japan imported servo drives, high-resolution digital closed-loop controller.
(2) modular design, multi-channel data acquisition and analog output module, open data management, enabling the load, deformation, displacement, speed and other measurement and control.
(3) high-precision load sensor uses imported high-precision 24 bits A / D, sampling frequency of 2000Hz, maximum resolution power of the whole 1 / 1, 000,000.
(4)with a mobile control box, easy to move or be rack-mounted, display machine working status, and provide the necessary test control process controls, positioning precision positioning to move the button and thumb wheel that can efficiently move traffic , fine-tuning can be accurate to 0.1 mm

3、Powerful, easy to use control software

(Softwarecopyright 2010SR046285)
(1) the use of component-based software system architecture, testing process free combination, meet all the conventional test method, test methods and increasing the standard library (GB / T, FZ / T, ISO, ASTM, BS, etc.).

(2)guide thetester to complete the relevant standard test, the user can not reset the case of existing hardware and software system updates, users can use online support, easy maintenance of equipment, never worry about.
(3)user-friendlyoperating software with intuitive operation, the button operation and easy to understand the environment greatly simplifies the test selection screen, start-up and real-time monitoring. The display is easy to understand and highly flexible, interactive data graphics rendering, enhanced test analysis.
(4)reports andcharts presentation class, or to meet your special needs and custom data-sharing format. The format will be easy to create effective output for the test results of test reports and other visual formats, such as Excel, Word, HTML, etc.

4、A full set of optional clamps, accessories and extensometer
Technical parameters· 

Note: Special machine-shaped widening acceptable height custom