Product Introduction

DRK101E Medical Tensile Tester is designed according to related standard by advanced principle. It adopts advanced micro-computer to control, which is easy to operate.

 

Product features  

Adopt high-precise ball screw, steady and accurate;

Imported servo motor, low noise and accurate running;

LCD display tensile force-time, tensile force-elongation and so on;

New professional software can show test data in real-time;

Powerful data analyzing function;

Adopt 24 bits high precise AD converter (Resolution can reach to 1/10,000,000) and accurate load cell to ensure fast and accurate data collection;

Embedded printer;

Multi-functions of parameter set, printing, inquiry, clear and calibration, etc.;

Analyze test results of batch samples, puts out Max., Min., and average data;

Memory function when power failure, overload protection, position limit protection and auto return;

 

Product application   

The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The signals of force and displacement changes are separately recorded by the load cell fixed on the movable gripper and embedded displacement transducer. The relative parameters of force properties can be obtained by further calculation.

It can used to test tensile property, tensile strength and deformation rate, tensile strength at break and elongation rate, 90 degree peel, 180 degree peel, tear resistance, puncture force of rubber plug, glide property of syringe, seal property of syringe, puncture property of syringe. By changing different test fixture, it also can used to test compressive deformation of foam, trouser tearing, puncture force of film, drawl force of rubber plug, etc.

 

Technical Standards

GB 8808、GB/T1040.1-2006、GB/T1040.2-2006、GB/T1040.3-2006、GB/T1040.4-2006、GB/T1040.5-2008、GB/T4850-2002、GB/T12914-2008、GB/T 17200、GB/T 16578.1-2008、GB/T 7122、GB/T 2790、GB/T 2791、GB/T 2792、GB14232.1-2004、GB15811-2001、GB/T1962.1-2001、GB2637-1995、GB15810-2001、ISO 37、ASTM E4、ASTM D882、ASTM D1938、ASTM D3330、ASTM F88、ASTM F904、QB/T 2358、QB/T 1130 、JIS P8113、YY0613-2007、YBB00042002、YBB00112004

 

Technical Parameter

 

Items	Parameter
Test Range	50N 100N  500N 1000N (choose any)
Accuracy	<0.5% of reading value
Deformation Resolution	0.001mm
Test Speed	1-500mm Stepless Speed Regulating
Specimen No.	1
Specimen Width	30mm (Standard) 50mm (Optional)
Specimen Clamp	By hand
Stroke	400 (Special requirement can be customized)
Dimensions	500mm(L)×300mm(W)×1150mm(H)
Power	AC 220V 50Hz

 

Main fixtures

Mainframe, communicate cable, power line, 4 rolls of printer paper, certificate of quality, operating manual