Install Instruction:

Specification:

① Power:d.c 6V

② Power consumptionin static:≤0.5mW(d.c)
③ Ambient temperature:1 — 55℃
④ Suitable water pressure:0.05MPa - 0.6MPa
⑤ Detection zone:60cm(±15%)(To Standard White Board)
⑥ Dia.of inlet/outlet pipe:(DN15)G1/2″
⑦ Dimensions:410*970*350mm

⑧Standard: CJ/T194-2004

Features & Functions:

GL-7101 Ceramic Urinal w/ Sensor Flusher is designed & produced according to IR-Sensor principle. Its intelligent 

flushing service and intimate function design will bring you a quality living experience. It has the following features.

Flush Automatically: After being used, the urinal will flush automatically by the sensor flusher.

Smart Deodorant: When the urinal is not used for a long time, it will flush automatically every 12 hours to prevent the trap 

from drying up and odor reversing.

Clean & Hygienic: Self-open and close w/o any touch can effectively avoid cross-infection of bacteria. 

Water-saving: It can adjust flushing time automatically according to different using frequency, saving water very dram

-atically.

Convenient to Maintain: With a built-in flow rate controller & filter, non-professionals can easily adjust water volume and

 clean filter.

Intelligent: Its control circuit is super mini-designed & controlled by micro-computer. The detection zone has been 

configured before ex-factory. Any manual adjustment is needless.

Optional Power Supply: Both AC of 220V and DC of battery operation is optional.

Power Saving: 4pcs of AA alkaline batteries can last for 2 years based on 300 cycles/day. Power consumption will be less

 than 0.5 kwh/month when connecting to power supply of AC220V.

Installation Features: Integrate sensor & flusher with ceramic. Do not need to pre-embed sensor equipment. It is quick, 

easy and convenient to be installed w/o any special requirement to wall thickness. Turn Off Water Automatically When

 The Power Source is Abnormal: It will stop flushing automatically when the power supply is cut off suddenly.

Use Instructions: