Install Instruction:

Specifiactions:

① Power:d.c 6V

② Power consumptionin static:≤0.5mW(d.c)
③ Ambient temperature:0 — 55℃
④ Suitable water pressure:0.05MPa - 0.6MPa
⑤ Detection zone:70cm(±15%)(To Standard White Board)
⑥ Dia.of inlet/outlet pipe:(DN15)G1/2″
⑦ Dimensions:650*345*310mm

⑧Standard: CJ/T194-2004

Features & Functions:

Flush Automatically: After being used, the urinal will flush automatically by the sensor flusher.

Smart Deodorant: When the urinal is not used for a long time, it will flush automatically every 12 hours to prevent the 

trap from drying up and odor reversing.

Clean & Hygienic: Self-open and close w/o any touch can effectively avoid cross-

infection of bacteria. 

Water-saving: It can adjust flushing time automatically according to different using frequency, saving water very

 dramatically.

Convenient to Maintain: With a built-in flow rate controller & filter, non-professionals can easily adjust water volume and

 clean filter.

Intelligent Control: Its control circuit is super mini-designed & controlled by micro-computer. The detection zone has been

 configured before ex-factory. Any manual adjustment is needless.

Installation Features: Integrate sensor & flusher with ceramic. Don’t need to pre-embed sensor equipment. It’s quick, 

easy and convenient to be installed w/o any special requirement to wall thickness.

Compact, Light, Small volume, Nice & Generous, Catering to The Modern Trend.

Use Instructions: