SAT-700 is produced with the most advanced technology from high-end natural gum, suitable for high-speed printing and digital printing on polyester and polyester blended fabrics. It gives sharp printing, brilliancy, better color yield and soft handing. SAT-700 has superiority of cost-effectiveness. SAT-700 series of products can be customized as per the requirements of the user.

 

 

Specifications:

Appearance: Light yellow powder

Stock paste conc.%: 6.25%

Stock paste viscosity: 10000cp (NDJ-1-type viscometer, 30rpm, 4 # rotor, 25℃)

PH value of stock paste: 7.5-8.0

Ionic: anionic

Solubility: Cold water soluble

Safety: Neither corrosive nor irritating. Convenient for storage; bagged powder can be stored for a long time.

 

Main Compositions:

Etherification polymer of natural plant gum

 

Thickener Properties Highlights

l  Perfect solubility and flow

l  Excellent filtration

l  Easy wash off and stable in storage

l  Flexible in size film

l  Resistance to high temperature vaporization

 

Stock Paste Preparation:

Put SAT-7 into water with particular ratio, stir with high speed for 1~2h until the stock becomes homogeneous. Mix stock with dye solution according to requirements.

When dealing with polyester and blended fabrics printing using disperse dye, non-volatile organic acids can be used to adjust the pH to 5.0~5.5. Also this thickener can be used in the stannous chloride or alkali discharge printing.

Note:

If original paste is not homogeneous or it does not disperse fully or the viscosity does not reach the max value, please do not add any preservatives or acid materials.