Thermostatic Two Way Brass Motorized Ball Valve

Product summary

Brass Motorized Ball Valve(DQ220)are used to control the on/off of the water system in HVAC system, consisting of actuator and valve body.

Actuator (driver) adopts synchronous motor driver for its stable performance. Internal limit contacts and energy saving design in valve, can cut off the power when the valve is fully opened or closed‍‍

‍‍‍‍‍
Technical parameter

●Working voltage: AC220V± 10%, 50/60Hz (special-made: 24vac)
●Power consumption: 4W(only when you open and close the valve)
●Running time of each action: ≤ 15s (valve-on); ≤ 15s(valve-off)
●Nominal pressure: 2.5mpa
●Applied medium: Cold or hot water, glycol water liquor (≤ 50%).
●Medium temperature: 2-90ºC
●Grade of protection: IP54
●Safety class: Ii (double insulation)
●Material of valve body: Brass ( surface is plated with nickel)
●Material of actuator: Outer cover: ABS+PC engineering plastic (fire-resistant) / base: Enhanced PBT (fire-resistant)

Character

●Temperature setting up dia-tray : The pointer will be at the location of needed temperature.

●The Switch of system power on/ off: ON/OFF will be Power on/Power off.

●The Switch of running mode: HEAT/COLL will be Heat / Cool switch.

●The Switch of Fan coil wind speed :1(L)-2(M)-3(H) , that is Low speed—Middle speed—●High speed, Wind valve controller has no this funcion.