Thermostatic  Electric Three-way Brass Motorized Valve(CKF3320T-05)

◆Summarize

●CKF7000 series of Motorized Valve is used to control the conversion of Heating Air Condition Water System, it is consist of a driver and a valve body .The driver adopts the synchronous motor to make its performance more stable and prevent the water hammer.

●We s est that use this kind of valve, you can choose model CKN301 thermostat to use together.

◆Character

●Valve body is plated with rustproof brass,and chromium on the surface.

●Low power, the motor only consumes the power when the valve door is opening or closing.

● It is set the limit relay contact inside to make the motor longer life.

● The motor and the valve body can be separated and connected in short time, in order to install it more easily.●Provided with manual switch, the power will be recovered automatically when finish the adjustment.

◆Technique Parameter

●Controling character: 3-line, springy recover

●Driver Voltage: AC230V+/-10%,50/60Hz (we can Special made 24V if you need)

●Power Consume:4VA(only when the valve door is open)

●Motor Variety: Synchronous motor

●Running Hour: Power on –18 sec.Power off-15sec.

●KV:≤0.06%Kvs

●Accepted pressure for valve body: 1600Kpa

●Connected way: tube screw thread G (Can not be connected with wimble screw thread)

●Medium of application: cold and frozen water, hot water and low-pressure vapor.

●Temperature of Medium:2-75 oc

●Temperature of Circumstance: -5oC~50oC

●Length of Down-lead:2500px

●Closed Pressure differential: 2-way 0.3Mpa; 3-way 0.15Mpa‍‍

24VAC and110VACThermostatic  Electric Three-way Brass Motorized Valvre can be specially made.‍

 

◆External Dimension

 

◆Electric Principle Drawing

 

Model Spec

 

2 years warranty for Thermostatic  Electric Three-way Brass Motorized Valve