• Easy! Fast! Powerful! Inbuilt air compressor! Best aid for vehicle diagnostic scaner

Introduction

Smoke Automotive Leak Locator ALL-300 is an innovative product that provide safe and convenient method to check leaks in automotive systems. Its so far the fastest way of detecting & locating the leak position of all pipe system in an vehicle at an affordable price, every garage and workshop will need one for significantly reduce the service time-cost, ensure better service quality and discover potential service request.

Professional, Flexible, Affordable

 Professional

Easy to Operate 
Fast in helping locate the leak 
Multifunctional
Dual Mode: Smoke Mode, Air Mode 
Visual pressure monitoring
Visual flow control 
Inbuilt air compressor 
5L/Min Super flow rate 
Visual monitoring of smoke fuel level 
Bigger oil tank up to 200ml capacity
Best mate for automotive scanner

  Time saving features:  
  Help locate the leak position on all vehicle systems in 1 minute.
   Fast determine the leak size by read the flow meter

 Flexible

 
With inbuilt air compressor, and power supplied by 12Volt vehicle battery, its the best tool for leak locating regardless of the working condition.

 

 Affordable

Unbeatable price / performance ratio
Designed for long time use 

Target customer

Car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.

 

ALL-300 Smoke Automotive Leak Locator is a handy new generation of automotive system leak locator.
ALL-300 use Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) , a 30 ML refill will be enough for test for 40 times( varies, depend on how long the user operate the equipment for each test.) 
ALL-300 is a one-time invest for a workshop or garage, but will help so much in work.

 

Feature

 Simple To Operate

The Smoke Automotive Leak Locator is easily controlled with a nice key-press film and a flow control. with visual indication of the pressure level and flow status.
Stabilized output pressure is perfect to perform leak test of all pipe system with no damage to the vehicle sealing.
Save time and fast leak detection. In most cases, a scan tool may find out pressure sensors abnormal etc., while actually the 'pressure low' problem is caused by leak somewhere. Use Air Mode to fast determine if there's a leak. and use Smoke Mode to find out where the leak is.

Use Air Mode to fast determine if there's a leak. and use Smoke Mode to find out where the leak is.

Adjustable air flow to perform leak test on different system that requires different flow amount. If the system doesn't leak, when reached the required pressure, the flow meter readings will drop to 0, otherwise, can determine the leak-size by the flow rate.

 

 Multifunction

The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets & Fittings, Hoses, Worn Throttle shafts, Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more....

 

Visual monitor smoke fuel level

 Fast to know the fuel level, don't have to guess if its time for fuel refill.

 

Specification

 Air flow control: 0.1~5 L/MIN
 Power supply : DC12V, 8A, 100W 
 Full set of accessories
 
Requirements on Surroundings

Ambient Temperature - 20 °C ~ + 50 °C
Relative Humidity < 90%

 

Product Resource

Product Flyers, Information, Demo video/software are available in member area.