Introduction

• Shop air driven Smoke Automotive Leak Locator ALL-300+ is an innovative product that provide safe and convenient method to check leaks in automotive systems. Its so far the fastest way of detecting & locating the leak position of all pipe system in an vehicle at an affordable price, every garage and workshop will need one for significantly reduce the service time-cost, ensure better service quality and discover potential service request.

  Professional, Flexible, Affordable

   Professional

  
  Easy to Operate 
  Fast in helping locate the leak 
  Multifunctional
  Dual Mode: Smoke Mode, Air Mode 
  Visual pressure monitoring
  Visual flow control 
  Shop air driven 
  8L/Min Super flow rate 
  Visual monitoring of smoke fuel level 
  Bigger oil tank up to 200ml capacity
  Automatic stop in 5 minutes
  Best mate for automotive scanner

  
    Time saving features:  
    Help locate the leak position on all vehicle systems in 1 minute.
     Fast determine the leak size by read the flow meter

   Flexible

  
  With shop air supply, the equipment is capable of generate mass smoke flow, and power supplied by 12Volt vehicle battery, its the best tool for leak locating when the workshop is equipped with shop air.

   

   Affordable

  Unbeatable price / performance ratio
  Designed for long time use

  Target customer

  
  Shop air equipped car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.

   

  
  ALL-300+ Smoke Automotive Leak Locator is a handy new generation of automotive system leak locator.
  ALL-300+ use Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) , a 30 ML refill will be enough for test for 40 times( varies, depend on how long the user operate the equipment for each test.) 
  ALL-300+ is a one-time invest for a workshop or garage, but will help so much in work.

   

  Feature

   Simple To Operate

  The Smoke Automotive Leak Locator is easily controlled with a nice key-press film and a flow control. with visual indication of the pressure level and flow status.
  Stabilized output pressure is perfect to perform leak test of all pipe system with no damage to the vehicle sealing.
  Save time and fast leak detection. In most cases, a scan tool may find out pressure sensors abnormal etc., while actually the 'pressure low' problem is caused by leak somewhere. Use Air Mode to fast determine if there's a leak. and use Smoke Mode to find out where the leak is.

   

  Use Air Mode to fast determine if there's a leak. and use Smoke Mode to find out where the leak is.

   

  Adjustable air flow to perform leak test on different system that requires different flow amount. If the system doesn't leak, when reached the required pressure, the flow meter readings will drop to 0, otherwise, can determine the leak-size by the flow rate.

   

   Multifunction

  The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets & Fittings, Hoses, Worn Throttle shafts, Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more....

   

   Visual monitor smoke fuel level
  Fast to know the fuel level, don't have to guess if its time for fuel refill.

   

  Specification

  
  Air flow control: 0.1~8 L/MIN
  Power supply : DC12V, 8A, 100W 
  Full set of accessories
  
  Requirements on Surroundings

  Ambient Temperature - 20 °C ~ + 50 °C
  Relative Humidity < 90%

Product Resource

Product Flyers, Information, Demo video/software are available in member area.