GPRS/UMTS/GSM/GPS

3G DVR tracker User manual

1. Summery

Working based on HSDPA,UMTS,EDGE,GSM,GPRS network and GPS satellites, this product can also anti-theft ,locate, monitor and provide urgent service to any remote targets .It is featured with compact and use-easy characteristics and therefore is mainly used in monitoring ,locating and tracking the car and other mobile things.

At the same time, it completely support the data transportation function of SMS/GPRS/HSDPA/Internet ,making it available for wide-area monitor, urgent dispatch ,traffic safety management and many different fields.

2. Features

1. Use USIM card, support WCDMA 3G network and GSM network.

   2 .Use video cables to connect CCD simulated camera externally.

   3.Support SMS/GPRS/ HSDPA/Internet data transportation (GPS/Internet will be illustrated in addition).

   4. Support mobile phone message to control and reach privacy security.

5. Support alarm by SMS, voice call and video call.

6. Record a video of alarm process to SD card.

7. Built-in Li-ion battery, can work normally even in power off state.

8. Monitor the place any time any where by video calls.

9. Integrate anti-theft, location, real-time control, monitoring, video record, urgent alarm and tracking service.

10. FTP function:  use FTP function upload mp4 video file to server.

11. Mainly used in monitoring and locating the ship and train, and in fleet management of moving car and truck.

3. Production description

 

1. LED indicator light 

2. USB jack

3. USIM jeck          

4. GPS antenna

5. 3G antenna         

6. SD CARD jack

7. ON/OFF           

8. Connection port

9. External camera jack

 

 

 

 

Indicator light instruction

The state represented by indicator light are as below：

 

Color	Action	Statement
red	Slow flicker	connecting to network after starting system
	Quick flicker	Alarm state
	Always on	Network failed
green	Always on	Arming state
	Slow flicker	Disarming state
	Quick flicker	Data processing

 

4. Specification

Content	Specification
Dim	111x67x27 mm
Weight	256g
Network	HSDPA,UMTS,EDGE,GSM/GPRS
Net frequency channel	EDGE/GPRS/GSM  850/900/1800/1900 MHz HSDPA/UMTS      850/1900MHz or 900/2100 MHz
Chip	SIRF3 chip
3G chip	WCDMA
GPS sensitivity	-159dBm
GPS accuracy	5m
Time to first initiate	Cold status  45s Warm status  35s  Hot status  1s
Input voltage	12V -24V input
User-defined input alarm detection level	0V
Video form	MP4
Battery	Chargeable changeable 3.7V 800mAh Li-ion battery
Standby	48hours
Storage temp	-40°C to +85°C
Operation temp	-20°C to +55°C
Humility	5%--95% non-condensing

 

 

 

5. Noun Definition

Locate mode：in this mode ,all the alarming information will be send every 3 minutes with Geo-info and begin to record a video.

3G monitor mode：all the alarm system will inform the master by incoming video call . It will then call the other member one by one until the phone is available if the master is not around. However, the device can dial all the phone numbers for 3 times. After failing 3 times, the unit will stop dialing automatically.

Incoming video phone

Master and normal members can initiate video by calling the host machine.

Arming:  in this state, the device will alarm according to the alarming mode of the time if external inputting port is triggered

Disarming:  I t means to deactivate the alarm state, and the device won’t alarm when the external inputting port is touched.

 

Hardware Reset

Press the emergency button, and slide the switch(ON/OFF) of the tracker to "ON", keep this operation for 5 seconds until green LED become red , the tracker will automatically restore factory settings and clear authorization number after it flicker twice.

Use：

First step: connection

1、Find the matched wire, and insert the jack of the product.

2、fix the included camera in the needed cabin ,please turn the camera on the right direction. 

Insert one end of video plug into the IN1 video jack of host machine, another end used to connect video interface. Finding  the included camera power wire ，then insert it into the corresponding 12V camera input interface,  another end connect the camera CD plug.

3 Connect urgent button with red and black wires.

4  set aside an external inputting jack to alarm，which is called negative triggering, it alarm when the unit is in the defence-conceling state.

5. Connect GPS antenna 3G antenna. Tighten the nut

6. Insert the external monitoring microphone to monitoring jack.

7. It can support 8GB SD card at the maximum ，mainly used in recording a video when calling the police.

8. Connect the red and black wires (power cord of the unit) to the positive and negative electrodes of the car, red wire to + and black wire to -

Circuit graph

 

 

 

2. SIM card installation

Make sure that there is no call transfer ，incoming call display is on, and PIN code turned off..

SMS must be plain text, can not recognize the PDU form.

Open the USIM rear cover，Put the USIM card into the holder, and turn the foil right and fasten it in place.

3. Power on

Turn the switch to "ON"，and check whether 3G/GPS antenna is connected or not. At this time, the red light Begin to twinkle. In 10 to 40 seconds, the unit will begin to work and acquire the 3G as well as the GPS signals. The indicator will change to green and keep flashing every 3 seconds. You can begin to set anything according to the user’ guide...

 

 

 

6.1 Initiation

Send “#begin#password#” in SMS to the unit, it will reply “System Recover successfully” and initialize all the settings. (Default password: 1234)

 

6.2change the password

Send SMS“#password#old password #new password#”to change the password.

After sending successfully the unit will reply with “The password has been successfully changed. The new password is ****”

6.2.2 Be sure keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password.

 

6.2.3 Make sure the new password is in 4 digits, or else the tracker can not recognize the password.

 

                                                                        

6.3 Authorization

Max five numbers authorized.

6.3.1 Set up master

Send SMS“#master#”。It will make the cell phone number as the authorized number automatically.  If set successfully, the unit will reply

“welcome use 3G GPS tracker ,the password is 1234”

。

6.3.2

Set up general user：

Send SMS“#user#phone number#”. All the other authorized number is set by the first authorized number. It will reply “The user number has been successfully changed. The new number is: **********.”, if be authorized successfully.

 

6.3.3 change master：send SMS “#newmaster#the administrator’s number ( which want to change)#”, if the number is successfully authorized, the unit will reply “The new master number have been successfully, the new number is ********.”

6.3.4 delete user：Send SMS “#deluser # authorized number(which want to be delete)#” ,if

  The number deletes successfully, the unit will reply “Delete the user number ********* successfully”.

6.4 the two convert command“track” and ”monitor” between the two mode

6.4.1. “track”（locate mode）is default statue, all the alarming message will be send every 3 minutes.

6.4.2. send SMS“#monitor# “to the unit，it will reply“monitor ok!”，changing to 3G monitor mode. In 3G monitor mode, the alarm system will inform the master by incoming video call or voice call. It will then call the other member one by one until the phone is available if the master is not around. However, the device can dial all the phone numbers for 3 times. After failing 3 times, the unit will exit dialing statue automatically.

6.4.3. send SMS“#track#”to the unit，it will reply“tracker ok!”and return to the locate mode。          

6.5 Single locations

dial a video phone：

6.5.1Without any authorized NO., dial the device, it will reply with Latitude and longitude information, while it won’t reply when dialing with an unauthorized NO. if there is an authorized No. stored.

6.5.2when dialing the device with an authorized No, it will hang up and reply a real-time Geo-info as below：

 

Lat: 22.636027N(latitude)  Long:114.032210E（longitude）,speed: 023.0（speed）   direction:270.0 (direction)  time:13/09/09 12:00(time)

http://maps.google.com/?q=22.636027N, 114.032210E

URL：mobile phone click the URL link in the positioning message, can view the location map of the device (mobile phone must support WAP get online function)

 

 

6.6 Anto track

6.6.1send SMS“#auto#030s#005n#”to the device, it will report the Geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 Arabic numbers and at maximum 255 in value.

6.6.2Send SMS “#auto#030s#***n#” to the unit, it will reply SMS heaps of times

6.6.3 cancel ：send“#offtn#”to the device。

Remark: Time interval must be more than 20 seconds

1.  Incoming Video call （Both GPS mode and 3G mode available）

The device will detect whether it is the administrator or user when incoming video calls, if not, it will hang up;  if it is the administrator or any user of the number , while the link will be established ,it could send real-time monitoring of images and sound at this time.

 

6.8  Incoming Voice call （only 3G mode available）

The device will detect whether it is the administrator or user when voice call incoming, if not, it will hang up; the device will be automatically connected after 6 rings if it is the number of administrator or any user, and you could talk with each other at this time.

 

7. Alarm function

7.1 movement alarm

7.11Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS “#move#” to the unit, and then the unit will reply “move alarm setting successfully!” In case of such a movement surpass 200 meters; it will reply SMS “Move+ the Geo-info to the authorized numbers. It will send an alarm SMS every 3 minutes when it surpass the limits.

7.12 Cancel: Send SMS “#offmove#” to deactivate the movement alert.

7.13 Over speed alert:

Set up: Send SMS “#speed#080#” to the unit (suppose the speed is 80km/h), and it will reply “speed ok!” When the target moves exceeding 80 km/h, the unit will send SMS “speed+080! +Geo-info to the authorized numbers. It will send an alarm SMS every 3 minutes.

Cancel: Send SMS “#offspeed#”to deactivate the over speed alert.

Remark: It is recommended that the speed alarm is set at not less than 50km/h. If the speed rate is too low may cause drift due to GPS signal is not accurate enough

 

7.14Urgent alarm

Press the SOS for 3 second; it will send SMS “help me! + Geo-info” to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS “#help#” to the tracker.

 

7.15 low power alarms

The device will send SMS “low battery+Geo-info”to all the authorized numbers in 30 minutes intervals when the voltage is about 3.4V.

7.16 External input alarm

The user can customize the types of alarm triggered. For example triggering by touching the car door or trunk.

Remark: it must be in arming statue.

How to set the terminal to arming statue：

Send a SMS“#arm#”to the device, it will reply with“Defense mode activated”if the device

Has been in defense state, no other operation.

After initiating this function, the unit will alarm when input alarm port change to 0.

 

How to set the terminal to disarming statue：

Send SMS“#disarm#”to the device, it will reply“Cancel defense”if it has been in the

Defence-canceling state, no other operation.

 

7.18: check IMEI

Send SMS“#imei#”to the device。

 

7.19 Modify time

Send SMS: “#time#time zone#”，it will reply “ time is set successfully” if it is successfully set.

It will reply: “Time zone OK”

For example：#time#8# means east 8 time zone.

            #time#-7# means west 7 time zone.

 

7.20 Set 3G video call center number

7.20.1The 3G video call center number can be set by send message“#center#phone number#”. If calling successfully, you can call the manager terminal number and contact real-time video anytime.

7.20.2 The calling center no can be cancelled by send message “#decent#”, and you will get a message.

7.21 CCD external camera: NTSC or PAL format switching program

If video format set not right, the video is Black and white.

You can send SMS:

PAL format: send SMS “#camset#0#”

NTSC format: send SMS “#camset#1#”

if it is successfully set. It will reply: “Set video format successfully”.

 

7.22 Switch External camera 1 and camera 2

It is necessary to set by sending the message ahead of time or software GPRS when host machine links two cameras and mobile phone can only link one.

Camera 1: #switch#1#”

Camera 2 :#switch#2#”if set successfully reply“Switch camera 1 successfully”or reply“Switch camera 2 successfully”.

 

7.23GPRS setting, FTP setting.

Generally, user don’t need to set the server parameter before use, the factory has set the right server parameter. If the tracker can’t connect server, please reference to the following:

7.23.1Set an IP address and port:

Send SMS “#adminip #IP address #port# ”

Our server1 parameter: " #adminip # 123.183.212.210#2277#” (windows Installed version)

Our server2 parameter: " #adminip # 123.183.212.133 #8067#” (web version)

 

If set up successfully, the tracker will reply SMS “setting IP address ,port set up successfully”。Cancel: Send SMS "#delip# " to cancel the setting：It will reply “IP address delete successfully”.

7.23.2Set APN (access point name)

If you use FTP function to upload mp4 video file to server. You need to set the APN(3G network provider's) of your own country.

Send SMS“#apn#APN CONTENT#user name#password#”,if not use “user name” and “password”,this parameter null. Send #apn#APN CONTENT###.

 For example: send SMS“#apn#3gnet###"(3gnet here is 3G network provider access point name of China).

As soon as APN has been set up, the tracker will reply SMS“APN setting successfully”.

7.24Car Engine Stop and Resume control

Engine Stop：

send SMS "#off#1234#"  (1234 is password)

 If set up successfully, the tracker will reply SMS “Car Engine-stop successfully” Relay will  Cut off car oil.

Resume Engine:

Need to send SMS "#resume#1234#"  (1234 is password)

If set up successfully, the tracker will reply SMS “Car Engine-Resume successfully” Relay will  resume car oil.

7.25SMS Mode & GPRS(HSDPA) Mode

Please switch to SMS mode if you use mobile phone for monitoring and positioning,

Send SMS "#smgp#1#" for SMS mode. (Default Mode)

Need to send SMS "#smgp#0#" to set up GPRS mode if you use software of monitoring center on PC.

Please reference to monitoring software instruction of the disk after set up GPRS mode.

8. Cautions

1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.

2. Don’t use & store the unit in dusty places.

3. Don’t put the unit in overheated or overcooled places.

4. Handle carefully. Don’t vibrate or shake it violently.

5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.

6. Don’t paint the unit, this may cause some foreign materials left in between the parts.

7. Don’t disassemble or refit the unit.

8. Please read carefully before using the manual to understand the level of each interface circuit, or else does not work or damage the product.

9. Trouble-shooting

Faults	Solution
Start failed	Check the power and see if it is fully charged or Correctly installed.
Video phone call failed	Check whether 3G antenna is well connected, USIM card is well placed or power-line voltage is normal.
Hang up failed	In existence of an authorized number, an unauthorized Number won’t be hanging up. Please initialize the unit and program it again.
No picture after getting through the through the video phone	Check whether the video line or power line are well connected.
Location message is zero	check whether the GPS antenna is well connected, Don’t use it in the place beyond reach of GPS signals