The Waterproofing System Specialist
HESHENG® HS-09 971
Water Based Polymer Cement Mortar Waterproofing Adhesive
INTRODUCTION
HS-09 971 Water Based Polymer Cement Mortar Waterproofing Adhesive refined by imported high polymer
emulsion, additives and fillers. Polymer cement mortar formed by mixing it with cement mortar, which will
forms solid and compact waterproofing coat(layer) after brushing.
It’s non-toxic, non-polluting, resistance to acid and alkaline, and corrosion. Easy application, a ideal
environmental friendly waterproofing material.
ADVANTAGE
a. Waterproofing, impermeable and damp proof waterproofing systems on exterior wall, roofing, toilet,
shower room, water pool, basement etc..
b. Waterproofing, impermeable and damp proof waterproofing systems on civil air defense, tunnel, dam,
metro etc..
c. Impermeable and damp proof waterproofing systems on porous masonry such as aerated concrete, air
brick etc..
d. Maintenance on new and old building, all kinds of paste on indoor and outdoor finishing material (such as
mosaic, ceramic tile, marble etc.).
MAIN TECHNICAL INDEX
Executive Standard(15 days project period): JC/T984-2005
Item
Index
Type Ⅰ Type Ⅱ
Setting Time
Initial Setting /min ≥45
Final Setting /h ≤12 ≤24
Resistance to
Penetration
Pressure Mpa
7d ≥0.1
28d ≥1.5
Bonding Strength Mpa
7d ≥1.0
28d ≥1.2
Bending Strength Mpa(28d) ≥8.0
Resistance to Pressure Strength Mpa(28d) ≥24
APPLICATION REQUEST
Waterproofing mortar application request:
1.Substrate treatment: substrate is clean, flat, solid, wet, free of floating ash, oil, dust and water.
2.Brushing substrate coat(layer) primer: brush a coat(layer) of 971 water based polymer cement mortar
waterproofing adhesive on substrate coat(layer) for better bonding between substrate and waterproofing
mortar coat(layer).
3.Waterproofing mortar : mix them evenly according to cement : sand : emulsion : water = 1 : 1 : 0.25 :
appropriate amount of water ).
4.While feeling primer tack-free on substrate coat(layer), squeegee or brush mixed waterproofing mortar on
the substrate, flatten and smoothen it with trowel. Brush 5-8cm (application thickness) for common basement,
water pool, 3-5cm for exterior wall, specific thickness according to specific design request.
5.In general, we apply natural maintenance, maintenance time depend on different temp. condition, 3-5 days
is better in normal temp..
6.Emulsion reference consumption: 1 - 1.5kg/m2.
APPLICATION PREPARATION RATIO
Item Prepared Material Weight Ratio
Waterproofing
Adhesive
Cement Sand Water
Substrate Coat(Layer) Primer 1 --- --- ---
Waterproofing Mortar 0.25 1 1 0.25
Paste on finishing material:
1.Evenly brush a coat(layer) of cement paste or waterproofing mortar on the paste side of substrate surface
material, adhere it to substrate, level and flatten it, thickness is 5 -8mm.
NOTE
1.Must not add water while applying waterproofing adhesive, and run out of all mixed waterproofing mortar
within 30mins.
2.In general, we apply 425# or above common silicate cement, natural sand particle can not excess harmful
amount, sand particle diameter is 1mm.
3.It should be sealed and stored above 5℃, shade place, shelf life is 12 months.
PACKAGE
25kg/bucket 50kg/bucket 53 US Gal/Bucket
Foshan Shunde Hesheng Chemical Industry Co., Ltd.
Web: www.he-sheng.com.cn/en/
Tel.:+86 757 22904888 Fax.:+86 757 22904999
Headquarter Addr.:No.11-1-2, Fu An Industrial Area, Leliu, Shunde, Foshan City, Guangdong Province, China
Sub-factory Addr.:NO.10 Fuyuan Rd.,Rongbian, Rongui, Shunde, Foshan City, Guangdong Province, China