Products features 

Use high-speed, high integration microprocessor to sample and control.

Use USB to connect the notebook PC and device.

Use wireless blue-tooth interface to communicate the notebook PC and device. The high-speed microprocessor integrated with device, need not move the computer during the field test.

4. Hardware cassette mechanism adopts DDS (from America), can correctly detect the breakdown :distortion, swell, shift, tilt, inter-turn short circuit deformation and contacting short circuit inter-phase.

5. High resolution dB to test, dual channel, 16 bit A/D sampling (the wave from curve will change obviously if change the tapping switch during the field tests. ) 
6. The software can adjust the output signal range, the maximum amplitude peak±10V
7. the computer automatically generating the test results to be Word document.

8. use precision , high stability components, repeat to test , the measurement repetition rate >99.5%.

9. Finished circuit boards, the surface with special treatment.

10. the device with two measurement system: linear scan and sectional scan.

11.amplitude-frequency characteristic complies the national technical specifications.

12.test data automatic analysis system, horizontal compare the similarity of A,B ,C, the results as below:

     (1)conformance is very good
    (2)conformance is good
    (3)conformance is bad 
    (4)conformance is very bad 
  Vertical compare A-A,B-B,C-C, obtain the original data to compare the winding deformation with the test data in the same phase, the results as below:
    (1) normal 
    (2) slight deformation
    (3) moderate deformation 
    (4)serious deformation
13. automatically generating Word document,convenient for customers to save and print.
14. Totally meet the technique conditions of DL/T911-2004:Survey of Frequency Response Analysis on Winding Deformation of Transformers.

Products parameters

1.scanning mode:(the device with two measurement system: linear scan and sectional scan )
 (1) linear scan distribution

  scan measurement range:(1kHz)-(2MHz),2000 scan frequency point, resolution:1kHz
(2) sectional scan measurement distribution 
scan measurement range:(0.5kHz)-(1MHz),2000 scan frequency point;
                    (0.5kHz)-(10kHz) , resolution 0.02 kHz
                    (10kHz)-(100kHz), resolution 0.2 kHz
                     (100kHz)-(500kHz), resolution 1 kHz
                    (500kH)-(1000kHz), resolution 1 kHz
2. Other techniques:

(1) amplitude measurement range: (-100dB)-(+20dB)
(2) amplitude measurement accuracy: 0.1dB
(3) scan frequency accuracy<0.01%
(4) signal input impedance: 1MΩ
(5) signal output impedance: 50Ω
(6) cophase repetitive rate: 99.5%
(7) dimension: 345mmx250mmx120mm

(8) aluminum case dimension: 425 X 335 X 215 mm

(9) aluminum case dimension: 425 X 335 X 150 mm
(10) weight:10kg