Model |
HS-50-5 |
HS-50-12 |
HS-50-15 |
HS-50-24 |
output |
DC voltage |
5V |
12V |
15V |
24V |
Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
Rated current |
7A |
4.2A |
3.4A |
2.1A |
Current range |
0~7A |
0~4.2A |
0~3.4A |
0~2.1A |
Rated power |
35W |
50.4W |
51W |
50.4W |
Ripple&noise |
80mvp-p |
120mvp-p |
120mvp-p |
120mvp-p |
DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
±10% |
input |
Voltage range |
90~132VAC/170~264VAC(selected by switch),235~373VDC |
frequency |
47~63HZ |
AC current |
1.3A/115VAC,0.65A/230VAC |
efficiency |
80% |
82% |
82% |
84% |
Inrush current |
Cold start current18A/115VAC,36A/230VAC |
Leakage current |
< 1mA/240VAC |
protection |
overload |
Rated output power115%~150% start over load protection |
protection type:hiccup mode,auto-recovery after fault condition is removed |
----- |
----- |
----- |
environment |
Working temp,humidity |
-10°C~+60°C,20%~90%RH |
Storage temp,humidity |
-20°C~+85°C,10%~95%RH non-condensing |
Withstand vibration |
10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes |
safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
Fit standard |
Safety standard |
Compliance toUL1012 |
EMC standard |
Compliance toEN55022,CLASSA |
others |
Dimension |
111*78*36mm(L*W*H) |
Weight/packing |
0.26kg/50pcs/14kg/0.027 m³/0.96CUFT |
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |