| Model |
HS-120-12 |
HS-120-15 |
HS-120-24 |
HS-120-36 |
HS-120-48 |
| output |
DC voltage |
12V |
15V |
24V |
36V |
48V |
| Voltage tolerance |
±1% |
±1% |
±1% |
±1% |
±1% |
| Rated current |
10A |
8A |
5A |
3.3A |
2.5A |
| Current range |
0~10A |
0~8A |
0~5A |
0~3.3A |
0~2A |
| Rated power |
120W |
120W |
120W |
118.8W |
120W |
| Ripple&noise |
100mvp-p |
120mvp-p |
150mvp-p |
150mvp-p |
180mvp-p |
| DCvoltage ADJ.range |
±10% |
±10% |
±10% |
±10% |
±10% |
| input |
Voltage range |
90~132VAC/180~264VAC(selected by switch),254~373VDC |
| frequency |
47~63HZ |
| AC current |
2.8A/115VAC,1.4A/230VAC |
| efficiency |
82% |
83% |
85% |
85% |
86% |
| Inrush current |
Cold start current18A/115VAC,36A/230VAC |
| Leakage current |
< 3.5mA/240VAC |
| protection |
overload |
Rated output power115%~150% start over load protection |
| protection type:hiccup mode,auto-recovery after fault condition is removed |
| Over voltage |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
42.6~44.2V |
54.8~56.6V |
| protection type:hiccup mode,auto-recovery after fault condition is removed |
| ----- |
----- |
| ----- |
| environment |
Working temp,humidity |
-10°C~+60°C,20%~90%RH |
| Storage temp,humidity |
-20°C~+85°C,10%~95%RH non-condensing |
| Withstand vibration |
10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes |
| safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
| Fit standard |
Safety standard |
Compliance toUL1012 |
| EMC standard |
Compliance to EN55022,CLASSA |
| others |
Dimension |
159*97*38mm(L*W*H) |
| Weight/packing |
0.48kg/45pcs/22.5kg/0.041 m³/1.45CUFT |
| note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
