Features:
1.The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.
2.Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance
3.To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4.Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators.
5.Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.
6.Supports up to (200) users / calls simultaneously.
7.Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.) |
|
| Electrical specification |
Uplink |
Downlink |
| Frequency Range |
GSM |
890-915Mhz |
935-960Mhz |
| DCS |
1710 ~ 1785 MHz |
1805 ~ 1880 MHz |
| Max .Gain |
F27-TB |
≥ 70dB |
≥ 75dB |
| Max .Output Power |
F27-TB |
≥ 20dBm |
≥ 27dBm |
| Band width (-3dB) |
Wide Band |
| MGC ( Step Attenuation ) |
≥ 31dB / 1dB step |
| Automatic Level Control |
≥ 15dB, auto shut off after 15dB |
| Gain Flatness |
GSM |
≤ 6dB(P-P); |
| DCS |
≤ 8dB(P-P) |
| Noise Figure |
≤ 8dB |
| VSWR |
≤ 2.0 |
| Group Delay |
≤ 1.5μs |
| Frequency stability |
≤ 0.01ppm |
| Spurious Emission & Output inter-modulation |
GSM Meet ETSI TS 151 026 V 6.1.0 |
| WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
| CDMA Meet IS95 & CDMA2000 |
| LED Alarm |
Standard |
| Power LED |
Power Indicator |
| ALC LED 1 (Low frequency Band) |
Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, |
| LED off after 5 seconds red color |
| ALC LED 2 (High frequency Band) |
Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, |
| LED off after 5 seconds red color |
| Mechanical Specifications |
Standard |
| I /O Port |
N-Female |
| Impedance |
50 ohm |
| Operating Temperature |
-25ºC~+55ºC |
| Environment Conditions |
IP40 |
| Dimensions |
250x330x52mm |
| Weight |
around 5.5Kg |
| Power Supply |
Input AC90~264V,output DC10V / 7A |
