Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption. |
|
| Electrical specification |
Uplink |
Downlink |
| Frequency Range |
GSM |
890-915Mhz |
935-960Mhz |
| WCDMA |
1920-1980Mhz |
2110-2170Mhz |
| Max .Gain |
≥ 55dB |
≥ 60dB |
| Max .Output Power |
≥ 7dBm |
≥ 10dBm |
| Band width (-3dB) |
Wide Band |
| MGC ( Step Attenuation ) |
≥ 15dB |
| 5, 10 and 15dB with two DIP switches |
| Automatic Level Control |
≥ 15dB,auto shut off 31dB after 15dB |
| Noise Figure |
≤6dB |
| VSWR |
≤2.0 |
| Group Delay |
≤1μs |
| Frequency stability |
≤0.01ppm |
| Spurious Emission & Output inter-modulation |
GSM Meet ETSI TS 151 026 V6.1.0 |
| WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
| CDMA Meet IS95 & CDMA2000 |
| WCDMA System |
Spurious Emission Mask |
Meet 3GPP TS 25.143 ( V 6.2.0 ) |
| Modulation Accuracy |
≤12.5% |
| Peak Code Domain Error |
≤-35dB@Spreading Factor 256 |
| CDMA System |
Rho |
ρ > 0.980 |
| ACPR |
Meet IS95 & CDMA2000 |
| LED Alarm |
Standard |
| Power LED |
Power Indicator |
| ALC LED |
Orange @ ALC 1~5dB, Red @ ALC 14dB~16dB, LED off after 5 second red color |
| Mechanical Specifications |
Standard |
| I /O Port |
N-Female |
| Impedance |
50 ohm |
| Operating Temperature |
-25ºC~+55ºC |
| Environment Conditions |
IP40 |
| Dimensions |
129x155x30mm |
| Weight |
≤1.0Kg |
| Power Supply |
Input AC90~264V,output DC7.5V / 1.2A |
