Closed Loop Large Stepper Motor Driver

Model:	SWA232AP
Brand:	JZS
Origin:	Made In China
Category:	Electronics & Electricity / Other Electrical & Electronic
Label:	motor driver , stepper motor , motor actuator
Price:	US $120 / set
Min. Order:	1 set

Inquire Now

Product Description

High Speed Large Nema 34 Stepper Motor Driver

Chongqing Jinzaisheng Mechanical Electrical Co., Ltd. is specialized in developing, manufacturing and marketing of hybrid stepping motors and peripheral products.We have comprehensive products mainly including, hybrid stepping motors in size of 20mm, 28mm, 35mm, 39mm, 42mm, 57mm, 60mm, 86mm, 110mm and 130mm, permanent magnet stepper motors in size of 5mm, 6mm, 10mm, 15mm, 24mm and corresponding drivers.

Product Description

Stepper Motor Driver uses the latest special motor control DSP chip technology of vector loop, thus completely overcome step-lose problem of the open-loop stepper motor, but also can significantly improve the high speed performance, reduce motor heating and motor vibration, so that power consumption of the machine reduces, processing speed and precision rises. In addition, in the situation that motor continuous overload, the output alarm signal is effective which makes the stepper driver has the same and reliability of AC servo system .the traditional 86 series and 110 series stepper motor is fully compatible with JZSA232AP .the cost is less 50% than the traditional AC servo system.

Features of Stepper Motor Driver

The latest special motor control DSP chip
Advanced vector loop control
Subdivision built in the driver
Automatic half-current
Differential signal input with isolation of the optocoupler
The static and dynamic current can be set arbitrarily(range from 0 to 8A)
The compatibility of the 2 phase stepper motor with 4-wire,6-wire and 8-wire
Up to 200KHZ frequency response
The subdivision of arbitrary(range from 1 to 256)
The protection of overcurrent ,overvoltage ,extreme position error and so on

The Usage of Stepper Motor Driver

Stepper Motor Driver is widely used in all kind of small sized and medium sized automation equipment and instruments, such as marking machine, medical equipment, engraving machine, cutting machine, laser typesetting, plotters, CNC Machine, automatic packing units and so on. Low noise and small vibration, it is highly thought by customers.

The Certificates We Got:

Stepper Motor Driver is with high quality and we have got ISO9001, CE, BV certificates.

Diagnoxis and Treatment

Phenomenon	Possible problem	Treatment
Stepper motor does not rotate	LED of power is off	Check the power
	Pulse does not meet the requirements	Check the voltage, width and value of high and low level.
	Subdivision is too small	Change the setting subdivision
	Current is too small	Change the current
	Alarm output	Reset on power
	Level of enable signal is low	Make the level if this signal high or suspend it.
Wrong rotate direction	Wrong terminal of motor	Exchange any line of the same phase.
Wrong rotate direction	Setting of P0-9 is wrong	Change the setting of P0-9
Inaccurate position	Bad terminal of pulse signal	Reconnection
	Interference of signal	Remove the interference
	Wrong subdivision	Change the setting of subdivision
	Current is too small	Increase the current
Stall	Acceleration time is too short	Lengthen acceleration time
	Torque of motor is too small	Change the motor of more torque
	Voltage of power supply or current is too small	Increase the voltage of power supply or current