Micro stepping Micro Stepper Motor Driver

Model:	SWB231DP
Brand:	JZS
Origin:	Made In China
Category:	Electronics & Electricity / Other Electrical & Electronic
Label:	motor driver , stepping motor , motor actuator
Price:	US $30 / set
Min. Order:	5 set

Inquire Now

Product Description

Low Noise Nema 17 Stepper Motor Driver with Micro Step

Chongqing Jinzaisheng Mechanical Electrical Co., Ltd. is specialized in developing, manufacturing and marketing of hybrid stepping motors and peripheral products.We have comprehensive products mainly including, hybrid stepping motors in size of 20mm, 28mm, 35mm, 39mm, 42mm, 57mm, 60mm, 86mm, 110mm and 130mm, permanent magnet stepper motors in size of 5mm, 6mm, 10mm, 15mm, 24mm and corresponding drivers.

Product Description

Stepper motor driver is series miniature, high performance stepper motor controller. It can be mounted onto 42/56/60 series stepper motor seamlessly through corresponding flanges. The thickness of these controller is less than 20mm. JZSB231DP outputs 0-4A adjustable current its mixed-decay current reduces the back-EMF effect under high motor speed and improves the performance. The enclosure is made of die-cast aluminum which provides a r ed, durable protection and improves the heat dissipation.

Features of Stepper Motor Driver

Wide range input voltage 12-40V
0-4A adjustable output current
1 to 128th micro stepping
Dual full H-bridge with PWM constant current control
Optical-isolated inputs
Automatic current reduction
Up to 300KHz frequency response

The Usage of Stepper Motor Driver

Stepper Motor Driver is widely used in all kind of small sized and medium sized automation equipment and instruments, such as marking machine, medical equipment, engraving machine, cutting machine, laser typesetting, plotters, CNC Machine, automatic packing units and so on. Low noise and small vibration, it is highly thought by customers.

Diagnoxis and Treatment

Phenomenon	Possible problem	Treatment
Stepper motor does not rotate.	LED of power is off.	Check the power
	Pulse does not meet the requirements	Check the voltage, width and value of high and low level.
	Subdivision is too small.	Change the setting subdivision
	Current is too small	Change the current
	Alarm output	Reset on power
	Level of enable signal is low	Make the level if this signal high or suspend it.
Wrong rotate direction	Wrong terminal of motor	Exchange any line of the same phase.
Wrong rotate direction	Setting of P0-9 is wrong	Change the setting of P0-9
Inaccurate position	Bad terminal of pulse signal	Reconnection
	Interference of signal	Remove the interference
	Wrong subdivision	Change the setting of subdivision
	Current is too small	Increase the current
Stall	Acceleration time is too short	Lengthen acceleration time
	Torque of motor is too small	Change the motor of more torque
	Voltage of power supply or current is too small	Increase the voltage of power supply or current