Characteristics

 

(1)  Multiple color to choose 

(2)  Good round shape

(3)  Accurate diameter (±0.05mm)

(4)  No bubble

(5)  Stable melting point

 

Compatible 3D Printers

 

Suitable for Makerbot,RepRap, UP, Flashforge, Leapfrog, Ultimaker,Printrbot and any other FDM 3D printer!

 

.75mm 3.0mm high quality PLA ABS filament 3D printer material 

 

Relative to the ABS, PLA has the following advantages:
(1) PLA's processing temperature is low, can be processed at 185 degrees;
(2) odor harmless, good smell like fried corn ;
(3) high strength, high stiffness, suitable for DIY players do duplicate printer components;
(4) forming performance is excellent, thermoforming dimensional stability, low shrinkage (0.3%),layers stick each other well;
(5) brightly colored, translucent color;
For customers, we are free to provide technical information counseling, ensure a smooth PLA used, for the market often reflects the PLA block nozzle solutions and non-stick hot bed.
 

Our PLA filament advantages compare to other ABS filament:

We select of premier grade ABS material, low water absorption, high toughness. Factory direct sales, inexpensive, buy more, bigger discount! !

 

	Our PLA	ordinary PLA
Type	3, A(clear natural),B(toughness translucent color,our technical innovation products),C(opaque color)	A(clear natural),C(opaque color)
Processing temperature	185 deg	210 deg
Odor	No smole, taste like fried corn	No,smoke,taske like fried corn
Diameter Variations	1.68-1.78mm, 2.8-2.95mm	1.56-1.85mm 2.75-3.1mm
Roundness	+/-0.03mm	+/-0.02~0.05mm
water absorption	Very low, no bubbles occur when printing even expose to air for over half a year	High, much bubbles printing at high temperature after the filament opened from seal packaging and exposed to air for a period( like one month or shorter time)
Surface gloss	Normal	Good
Toughness	Type A and C is not good toughness, B is good tough	Not good toughn

Production Control

 

1.Produce process

I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

III.Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg

IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.

 

2.Productiong quality control

        I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

       II.keep each record filament samples sent to customers, build a tracking able document.

       III.when the filament put on shelf longer than half a year, we will dry the filament again.

 

3.About waste & recycle

Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.

We haven’t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance purpose.

 

4.packaging

       We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box

       We also have vacuum heated bag to replace of PE bag, make better avoid moisture.

 

5.research and developing

       we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

       we have colors:

       Natural, white, black,red, sky blue, dark blue ,florescent green,dark green, florescent yellow, dark yellow ,orange, purple, pink,grey, brown,glow in dark etc