Fluorescent green  PLA 1.75mm 3D printing filament 
1.High precision dimensions 
2.Vivid color 
3.for variety desktop printers 
 

 

 

 

  

  Fluorescent green PLA 1.75mm 3D printing filament

 

PLA is bio-based materials and easy to print for variety desktop printers, besides PLA material’s advantages such as no odor, lower melting point and good flowbility, no need to post-treatment etc. Our products also have following advantages:

 

(1) High precision dimensions with 3.00+/-0.10mm range which make material supply easily and with high print quality;

 

(2) Good roundness with 3.00+/-0.08mm range which make material supply easily and with high print quality;

 

(3) Order flexibility and short lead time;

 

(4) Vivid color;

 

(5) Good logistic control and service support

 

(6)Our company is specialized on manufacturing PLA filament for 3D printer, with the imported production equipment, strict quality control, very good dimensional accuracy, smooth surface, high strength, and dozens of colors to choose.

 

 

we have colors:

 

 

 

Natural, white, black, red, sky blue, dark blue ,florescent green, dark green, florescent yellow, dark yellow,orange, purple, pink, grey, brown, glow in dark etc

 

 

 

 

3D printer filament PLA  specifications are listed below:

 

POLYMER PROPERTIES	Description
Material	PLA
Filament diameter	3+/-0.10mm
Roundness	3+/-0.08mm
Print temperature	175 – 200 centigrade
Spool capacity	1kg (Can be customerization )
Packaging Detail:	1kg/spool/polybag/box, N.W.:1kg, G.W.:1.4kg box size: 21*21*9cm 12box/carton, N.W.: 12kgs, G.W.: 16kgs carton size: 56*44*23cm

 

 

 

Production Control

 

1. Produce process

 

I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).

 

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

 

III. Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.9-3.0mm, roundness +/-0.08mm, each spool net weight 1kg+/-0.05kg

 

IV we put all filament spool in shelf, different kind in different shelf, all categories arrange orderly.

 

2. Production quality control

 

I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

 

II. keep each record filament samples sent to customers, build a tracking able document.

 

III. when the filament put on shelf longer than half a year, we will dry the filament again.

 

3. About waste & recycle

 

Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.

 

We haven’t produced with scrap outlet, rework & recycle material, or dispose, but for quality assurance purpose.

 

4. Packaging

 

We put each filament /spool on seal PE vacuum bag, then in smaller box, then out big carton

 

We also have vacuum heated bag to replace of PE bag, make better avoid moisture.

 

5. Research and developing

 

We have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

 

Payment accept:

 

T/T

 

PayPal

 

Western Union wire