Wire, Cable, Pipe, Laser Outer Diameter gauge is the high-accuracy survey installment that uses the laser scan to carry on Non-contact the on-line measure.
Products have been widely used in wire and cable, metal pipes, plastic pipes, medical devices, machinery manufacturing and other industries. Performance is stable, It is your ideal choice for improving product quality.

1.  Technical parameters
 Model   Measruing Range  Differentiation          Accuracy 
 LDM-25     0.1-20mm         0.001          ±0.02%×(Reading)±0.001mm 
 LDM-50     0.2-45mm         0.001          ±0.02%×(Reading)±0.002mm 

2.  The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V ± 15%    50 - 60Hz
Operating temperature: -10 ~ 40 °C
Humidity: <85% RH
Work mode: continuous
Power consumption: <30WExternal dimensions:
Dimensions: LDM-25/LDM-50 Measuring head: 461mm×80mm×200mm

3.  The Device with the following Characteristics
i. Can be connected PLC, industrial computer.
ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.
iii. Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption.

4.  Display Controller (Model:DDC-3, DDC-5)
i. It be used to display and control.
ii. Applicable to DC motors, VVVF motor.
iii.The controller can control the speed of extruder or the tractor according to the diameter tolerance.
Signal distance: More than 500m
Output voltage: ±10V
With RS485 It can connect to PLC industry controlling computer 
The PROFIBUS-DP or MODBUS
Can be selected.
External dimensions:164mm×85mm×280mm (Model:DDC-3)
                    100mm×100mm×120mm (Model:DDC-5)
Installation hole size: 152mm×76mm (Model:DDC-3)
                        90mm×90mm (Model:DDC-5)

Stand size 350mm×200mm×(700-1000)mm
Center high of the measuring position is 900 -1200mm
Stand height can be adjusted