Dual Axis Laser diameter scan Micrometer is the high-accuracy survey installment that uses the laser scan to carry on the no-contacts on-line survey. It (namely X axis and Y axis) simultaneously measure the diameter in two directions.
Applicable to metal wires, pipes, wire and cable, etc. The diameter of the measurement and control. Bi-directional measurement, the average shows that can simultaneously show the wire, pipe diameter, roundness.
Performance is stable, It is your ideal choice for improving product quality.

1.  Technical parameters
   Model     Measuring Range    Differentiation            Accuracy 
LDM-25XY         0.1-20mm           0.001       ±0.02%×(Reading)±0.001mm 
LDM-50XY         0.2-45mm           0.001       ±0.02%×(Reading)±0.002mm 

2. The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V ± 15% 50 - 60Hz
Operating temperature: -10 ~ 40 °C
Humidity: <85% RH
Work mode: continuous
Power consumption: <30W
Dimensions:  Measuring head: 372mm×360mm×60mm

3.  The Device with the following Characteristics
i. Can be connected PLC, industrial computer.
ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.
iii. Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption.

4.  Display Controller (Model:DDC-3, DDC-5)
i. It be used to display and control.
ii. Applicable to DC motors, VVVF motor.
iii.The controller can control the speed of extruder or the tractor according to the diameter tolerance.
Signal distance: More than 500m
Output voltage: ±10V
With RS485 It can connect to PLC industry controlling computer 
The PROFIBUS-DP or MODBUS
Can be selected.
External dimensions:164mm×85mm×280mm (Model:DDC-3)
                    100mm×100mm×120mm (Model:DDC-5)
Size after packing : 50 Centimeters * 50 Centimeters * 18 Centimeters 
Weight : 20.000 Kilogram