The marine environment is quite a hard challenge but thanks to the experienced team of corrosion specialists, we designed the NPC 7000 series, the one oriented to all the applications close to and under the sea. Our line of primers and intermediate epoxies gives an added value to the specific systems for severely corrosive environments; the modified nanotechnology development permits to maximize the barrier effect. As per EN ISO 12944 Jetties, vessels, barges and tugboats (underwater, splash and topside). are C5M-High certified.

 

 

· Increased barrier effect: increased impermeability to water, gases and vapors; +300%!!!

 

· Increased barrier effect: increased impermeability to water, gases and vapors; +300%!!!

 

· reduced coating thickness upt to 30% less!!! = MONEY SAVING

 

· Improved crack bridging properties;

 

· Higher modulus and strength of coating;

 

· Increased hydrophobic and oleophobic coating properties;

 

· Improved surface wettability;

 

· Bettered adhesion to various substrates and layers;

 

· Improved protection properties (barrier properties, blistering, adhesion) obtained with reduced coating thickness application (when applied at lower thickness);

 

· Enhanced heat resistance and electrical conductivity;

 

· Bettered wet adhesion than standards;

 

· Preserved, sometimes ameliorated, coating characteristics such as application conditions (viscosity), surface preparation requirements and drying time;

 

· Product customization: both features of coatings and coating systems can be specifically tailored to fit client's specific requirements;