This series has been developed to guarantee the most reliable protection for the offshore installations: fixed platforms, FPU, mobile rigs. From the underwater zones up to the topside and the interiors, NPC 11000 offers the most advanced technology coatings for a correct project completion. All the finishing systems range from the epoxy high solid, if the cosmetic appearance is of less importance, to glossy polyurethanes where a complete range of RALs is available. The technology inside the NPC 11000 is at its best and offers a complete corrosion inhibition with a medium-low level of maintenance.

· Increased barrier effect: increased impermeability to water, gases and vapors; +300%!!!

· reduced coating thickness upt to 30% less!!! = MONEY SAVING

· Improved crack bridging properties;

· Higher modulus and strength of coating;

· Increased hydrophobic and oleophobic coating properties;

· Improved surface wettability;

· Bettered adhesion to various substrates and layers;

· Improved protection properties (barrier properties, blistering, adhesion) obtained with reduced coating thickness application (when applied at lower thickness);

· Enhanced heat resistance and electrical conductivity;

· Bettered wet adhesion than standards;

· Preserved, sometimes ameliorated, coating characteristics such as application conditions (viscosity), surface preparation requirements and drying time;

· Product customization: both features of coatings and coating systems can be specifically tailored to fit client's specific requirements;