Production capacity

180-240t/h (under standard condition)

Standard condition

Altitude

≤1000 m

Standard atmospheric pressure

1Mpa

Cold aggregate average moisture content

5%

Environmental temperature

20℃

Aggregate discharge temperature

160℃

Cycle time

45s

The finished material

medium-grain

Conditions related to production capacity

The average moisture content refers to the water content of material surface, the material inside the water content would reduce the drying drum production capacity.

Atmospheric temperature is around20℃, including powder and asphalt production

Aggregate density is1600 kg/ M3

Aggregate proportion into the mixing equipment must be correct, conforming to the grading standard

Powder density is1120 kg/ M3

Aggregate cannot be porous and patchy, altitude, the effect of fuel heating value,the finished material for grain type in

Aggregate cannot be porous and schistose, altitude, influence of the fuel heating value fuel heating value, the finished material is medium-grain type

Standard weight measurement (static)

Accuracy of measuring

Sand and stone

±0.5%

Powder

±0.25%

Asphalt

±0.25%

The dust removal efficiency

Dust emissions amount≤50 mg/Nm3

Temperature stability

Hot aggregate discharge temperature stability

±5℃

The finished material discharging temperature stability

±3℃

Ambient noise

≤85 dB (A)

Operating reliability

≥95%

Operating mode

Full automatic control, semi-automatic control, manual control

Machine size (including the finished silo container)

L*W*H：49*40*25m

The driving power and total weight

Total installed capacity

≈650kw

Total weight

280t