VIDEO/MOVIE (link): http://www.youtube.com/watch?v=Jh23f5HcyYo

Introduction

FUE instrument is an automatic motorized punching devi-ce to extracts grafts for FUE technique, it con- sists of amotorized handpiece that moves a punch of 0.8-1.3mm in diameter with an alternating rotation movement.

Features

Easy to use, accurate, and Time saving device

1.Punch rotates automatically in alternating derection. it enable to avoid twesting and damaging hair grafts when the punch penetrates the skin.

2.The rotation speed of the punch is adjustable, The speed is from 4 to 10 revolutions per second.

3.The rotation angle of the punch is adjustable, From 22° to 540°.

4.Utmost thin walled punch.

5.Touch screen design, easily to control and operate

Instrument components

• Console
• 

• handpiece
• 

• Disposable punch
• 

• Forcep
• 

• The ports of console

• 

  ① Handpicece port：connect the handpiece to console.

  ② Pedal switch port：connect the pedal switch to console.

  ③ Power socket：connect the console to power source with power cable.

  ④ Leakage protection switch：turn on or turn off the console.

   

  5 Method for loading and unloading the punch

  1) Rotate the fixing tube of handpiece in one direction，see Fig-1.

  2) Insert the punch into the central hole of handpiece,

  3) Rotate the fixing tube in reverse direction,the punch is loaded. see Fig-2.

  4) Unload the punch in reverse process.

  

  Operating method

  preparation

  1) check the punch,if not intact,take a new one.

  2) read and comprehend the user manual.

  Operating procedure

  1) Connect the console to power source,

  2) Turn on the switch,

  3) Choose bidirectional or monodirectional mode,

  4) Set the parameter of speed and angle,

  5) Press the count button and switch to the count interface,

  6) lay up the punch near the scalp for hair grafts extraction,

  7) puncture in the scalp,

  8) pick up the hair grafts with forcep,

  9) Implant the hair grafts in bald area.

   

  Sterilization

   

  	Condition	Suitable components
  Autoclaving	temperature：120℃ duration：30 minutes	punch
  EO fumigation	EO concentration：600 (±30) ppm temperature：50(+/-3)℃ RH：50(+/-5)% duration：6 hours gas composition：EO 30% + CO2 70% pressure：0.5 - 0.7kg/cm2	Punch、handpiece

•  

• Technical data

   

  Casing measurements WxDxH:	310x300x120mm
  Weigh:	5.5kg
  Power:	acc. to design220V~50Hz
  Safety fuses:	acc. to design220V=3A

• The menu of touch screen
•  
•  

•