Product Description of taifun gt 2 atomizer                                          

1. Glass tank in a stainless steel sleeve. 
(Specially ground glass sleeves for the Typhoon II GT customized) 

2. The setting, closed, open sleeve is adjustable with the evaporator compartment lid, 
by increasing or decreasing the indentations in height. 

3. Air supply adjustable up to a maximum opening of 3 mm? 
The air supply from outside is from 2 sides, with a different number of air holes. 
When fully open, the entire air duct is 3 mm, therefore no sham. 
Any whistling noises are not present, only normal Luftz eräusche. 
A contained in Aquatube Teflon sleeve is used for area reduction of the air tube if necessary 
in the evaporation chamber, possibly in order to achieve a lower air flow width. 

4. Replacement seals are included 

Optional / accessories: 
- XS glass tank set 
- Stainless steel sleeve as used instead of glass sleeve 
- Evaporator chamber sleeve with widened indentations for even higher Liquidnachfluß 

In principle one can use with the GT II almost all types of windings. 
When complete opening of the air supply and corresponding winding is achieved 
the result of a Tröpflers, just with a tank system.