CNC Plate Punching Machine

COMP1003

 

1.Basic parameter

Work piece

Size (L x W): 1500×800 mm

Thickness: 5～25 mm

 

Punching Power: 1000 KN

Max. Punching Diameter: Φ26 mm (within punching power)

Quantity of Module: 3 (option: marking)

Min. distance from edge to the hole: 25 mm (when diameter ≤25.5mm)

Quantity of clamp: 2

Max. punching frequency: 60/ min (continue)

X-axis in-feeding speed m/min: 20

Y-axis in-feeding speed: 20m/min

Air pressure: 0.5 MPa

Total power: 20KW

Overall dimensions (L×W×H): 3500×3000×2500 mm

Machine weight: 8000 Kg

2.Technology requirement

Material of plate:

σb ≤710 N/mm2

σs＞350 N/mm2

Warping Degree: <7mm

Camber: ≤2mm/1000mm

Horizontality: ≤5mm/1000mm

 

3.Working environment

Power source: 380V±10%, 50HZ±1HZ

Air source: Clean and dry, Compressed air pressure is greater than 5bar, flow 20L/min.

Workshop environment: humidness 30～90% RH, Without harmful and corrosive gas and dust. Hydraulic system use domestic 46# advanced anti-wear hydraulic oil (in winter use 32#) or adopt higher performance products.

ign:n��tx(��p-�ce:none'>Qty. (set): 3

 

No. of tool (pcs): 4pcs/set

 

Precision

Error of two holes in one hole group (＜500mm): ±0.4mm

Error of holes in neighbor hole groups (＞500mm): ±1.0/15000mm

 

Cooling

Inner + outside cooling: Equip paper tape filter

 

Electric system: Schneider CANOPEN bus control

 

Feeding system

Clamping arm stroke (up and down): 300mm

Clamping arm stroke (left and right): 20000mm

Overall dimension (L×W×H) mm: 21000×1100×1400

 

Spindle motor power (KW): 11

Rated power: ≈72

Machine Weight (Kg): ≈15000

Overall dimension (L×W×H) mm: 5870×1650×3550