UV3320 is a one-component, low viscosity, UV-curable liquid adhesive, is a high-strength, multi-purpose adhesive. Resistant to impact, vibration, and solvent. Cures rapidly in a short time. For rapid fixing, sealing glass and glass, glass and metal.  

Properties Uncured

	Typical Value	Range	Test Standard
Appearance	transparent liquid
Chemical type	urethane acrylate
Viscosity (mPa.s@25°C)		1000-3000	GB/T2794-1995
Density (g/cm3)	1.05	1.03-1.1	GB/T13354-1992
Tack free (s)	3
Curing depth(mm@30s)	3
Completely curing energy

 

 

 

Physical Properties              

 

	Typical Value	Test Standard
Hardness (Shore D)	65	GB/T2411-1980
Tensile strength(MPa)	20
Water absorption(%,24h@25 °C)	1.7
MMA/Glass
Elongation at break(%)
Work temperature(°C)	-50-150

 

 

 

Electric Properties              

  

	Typical Value	Test Standard
Dielectric constant (1MHz)	4.9	GB/T1693-2007
Dielectric loss (1MHz)	0.03	GB/T1693-2007
Dielectric strength (KV/mm)	27
Volume resistivity (Ω.cm)	3.8×1015	GB1410-1989

 

Instructions for Use

 

The Surface to be bonded should be clean stain oil and dry.

The adhesive is applied to the object to be glued joints or protected surface. 
Be a wavelength of 365nm UV light irradiation, ultraviolet light can shine through to confirm the adhesion site. 
UV curing speed depends on the intensity of the light source and the layer of distance and time required for curing. 
After use, shall close the lid immediately. Subject to sizing black hose. Away from sunlight, UV light and artificial light during storage.  

 Notice

 

Keep far away from children.

Use at well ventilated place is recommoned.

In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse with a plenty of clean water immediately and go to the hospital for an examination.

For further information, please refer to MSDS.

 

 

 

 

Packaging & Shipping

 

  

Package

 

1kg.

 

 Storage

 

Store at 8-28°C,keep away from light and moisture.

 

Shelf life:12 months.