1．Environmental Conditions:
Temperature: －5°C ~ 40°C
Relative Humidity: ≤90%
Power supply: AC220V ± 10%，50±1Hz
2．Measurement Range:
Luminous Intensity:0 ~ 120000cd
Optical Axis Offset:
High Beam: Vertical: (Up)400mm/10m ~ (Down)560mm/10m
Horizontal: (Left)560mm/10m ~(Right)560mm/10m
Low Beam: Vertical: (Up)400mm/10m ~ (Down)560mm/10m
Horizontal: (Left)560mm/10m ~(Right)560mm/10m
Elevation of Light：350 ~1400(mm)
3．Indicating Value Error:
Luminous Intensity: ± 10%
Optical Axis Offset: ± 32mm/10m
Central Height of Photovoltaic Box:less than±10mm
4．Measuring Distance: 80-120mm
5．Length of the guide rail: 5m
6．Power Consumption: 200W
7．Weight: 100kg
8．Dimensions: 800mm (Length)×670mm(Width)×1700mm (Height)
9．Package(wooden case)：1000mm (Length)×700mm(Width)×1800mm(Height)
The MQD-6B type composition by the headlight tester host and high-performance IPC can be used for the automatic measurement of motor vehicle headlamps, high beam luminous intensity, high beam beam offset; dipped beam offset; headlampthe parameters of the reference center height. Meet GB7258, GB 21861, GB18565-related the headlamp measurement of the technical requirements, networking detection applicable to motor vehicle safety performance and integrated performance test line, the car manufacturer's new car factory test, as well as motor vehicle maintenance department of motor vehicle maintenance detection .
▣ Equipped with high-performance industrial computer control, fast measurement speed, high accuracy; the online adjustment feature set of professional design the man-machine dialogue interface, adjust the lighting is more simple and convenient; dual display system provides dual data backup.
▣ The high-performance industrial computer built state-of-the-art image acquisition card with high precision, sharp image processing technology, with excellent performance of the embedded system, automatic completion of high beam headlamp, near light the parameters, accurate detection.
▣ Dual CCD measurement technology, independent testing, online to adjust motor vehicle headlamp low beam.
▣ Multi-point auxiliary the searching light system and a special CCD search light way to ensure the speed of light detection.
▣ Double positioning system, effectively prevent outside light interference.
▣ Light control detector application of high quality silicon optoelectronic devices and high-precision CCD, and the match as recommended by the International Commission on Illumination V (λ) curve, luminous intensity measure high precision.
▣ Equipment allocates the standard RS232 communication interface , has the reliable networked software and rich communication instruction.
▣ Bright digital display system to facilitate the detection line manual identification.
▣ Support line adjustment mode.
▣ Support for dual-lamp with the inspection mode,only cost about 20s to finish the test.
