1.Environmental Conditions:
Temperature: -5°C ~ 40°C
Relative Humidity: ≤90%
Power supply: AC220V ± 10%,50±1Hz
2.Measurement Range:
Luminous Intensity:0 ~ 120000cd
Optical Axis Offset:
High Beam: Vertical: (Up)400mm/10m ~ (Down)560mm/10m
Horizontal: (Left)560mm/10m ~(Right)560mm/10m
Low Beam: Vertical: (Up)400mm/10m ~ (Down)560mm/10m
Horizontal: (Left)560mm/10m ~(Right)560mm/10m
Elevation of Light:350 ~1400(mm)
3.Indicating Value Error:
Luminous Intensity: ± 10%
Optical Axis Offset: ± 32mm/10m
Central Height of Photovoltaic Box:±10mm
4.Measuring Distance: 1m
5.Length of the guide rail: 5m
6.Power Consumption: 200W
7.Weight: 100kg
8.Dimensions: 800mm (Length)×670mm(Width)×1700mm (Height)
9.Package(wooden case):1000mm (Length)×700mm(Width)×1800mm(Height)
The MQD-6A type can be used for automatic measurement of motor vehicle headlamps to high beam luminous intensity, far beam offset; the dipped beam offset; headlamp benchmark center height of the parameters. Meet GB7258, GB 21861, GB18565-related the headlamp measurement of the technical requirements for vehicle testing organizations at all levels, vehicle repair, automobile manufacturing.
▣ Using state-of-the-art machine vision and high-speed DSP6000 image processing technology, automatic completion of the headlamp high beam, near light the parameters, accurate detection.
▣ Dual CCD technology, independent testing, to adjust motor vehicle headlamp low beam.
▣ Multi-point auxiliary the searching light system and a special CCD search light way to ensure the speed of light detection.
▣ Double positioning system, effectively prevent outside light interference.
▣ Equipment allocates the standard RS232 communication interface , has the reliable networked software and rich communication instruction.
▣ Bright digital display system to facilitate the detection line manual identification.
▣ Support line adjustment mode.
▣ Support for dual-lamp with the inspection mode,only cost about 25s to finish the test