Model: SA-28

Motor: 5HP (Mating drums)

Cutter: (imported from Japan SKD-11) (Free grinding tool warranty 3 years)

The inlet port: 230 * 200MM fixed knife: a knife roundabout 2 rows: 2 rows of 3

Output speed: 960 / MIN

Output per hour: 50-80KG / H (depending on the compound may be)

Mechanical Dimensions: 670 * 450 * 920 (L * W * H) MM

Weight: 132KG

1. The front blade, increasing blade cutting angle, improve cutting efficiency, forming a uniform particle shape, less powder
 2. The sub-claw type, flat type, sheet-type film of four, for broader
 3. Investment hopper four soundproof inner stainless steel outer strengthened quiet good
 The exterior design simple, practical, introduction of the European CE safety design standards
 5. The tool SKD material, good toughness, wear resistance, extended length adjustable blade
 6. The use of imported bearings, durable
 7. compact structure, do not hide material, easy to clean, easy maintenancewarranty 3 years)

The inlet port: 230 * 200MM fixed knife: a knife roundabout 2 rows: 2 rows of 3

Output speed: 960 / MIN

Output per hour: 50-80KG / H (depending on the compound may be)

The maximum amount depends on crushing mill screen hole diameter, crushed shapes, materials and the like.
 Grinding noise when crushed due to structural materials, the configuration of the motor, the tool differ.
 There are bigger models, special models to choose customized specifications

the body of the machine is welded by steel plate, which is firmed and shock jreventive itcan be compare with cast body and has a service life of ten years
especially suited for granulating the granulating the plastic material.such as pasteur ,large plastic item,tubes and pipes .plates,chassis ets