General description:

3D wire mesh panel welding machine:

Touching screen control system

Pneumatic and stepper motor

High automatic and production capacity

CE certificate

Description of 3D panel production line:

The wire mesh-welding machine produces two mesh sheets.

Then they are fed to the integrating machine in a vertical way, while the insulation material is placed between them. The 24 straightening and cutting sub-systems are fed with wire from their pay-off stations. Then the wire rods are fed through the insulation material and cut in pre-determinate lengths. The welding head moving in the predetermined steps, welds the wire rods to the appropriate positions, keeping the correct distance of the wire mesh sheets and producing the sandwich panel. A transporting roller conveyor moves away the finished product while the factory crane moves it to the storage area.

A NC programmable wire mesh welding line model for the production of reinforcement wire mesh in sheets with line and cross wires fed from coil.

Layout plan of 3D panel production line:

Technical Specifications:

Wire diameter: 1.8-2.8mm

Distance between the two mesh sheets: 70 mm -150 mm

Wire mesh width max. : 1200 mm

Gap between the welded mesh and the core: 13mm or 19mm

EPS plate material: Flame retardant polystyrene foam board or rock wool

EPS plate thickness: 66mm, 78 mm, 96mm, 108mm, 126 mm, 138mm

Wire inserting structure: Sparse or dense inserted in two sides or single side

3D panel length: min.: 2000 mm max. : 3000 mm

Welding leakage rate: ≤ 3%

Output: 360㎡/8 hours

Welding strength: ≥ 450N/ welding point

Air supply: 3 m3/min, 0.8-1Mpa

Related power: 36KVA

Fixed part of the main machine (L*W*H) 6,900mm×1,860mm×1,700mm

Length of main machine plus movable support of both sides 3,400+6,900+3,400= 13,700mm

Weight of main machine 4,500kg