brife introduction

PRESISION LCR Meter HPS2810B

HPS2810B SERIES IS A NEW PRESISION LCR METER WITH VARIOUS FUNCTION AND A 

HIGHER TEST FREQUENCY .THIS INSTRUMENT HAS A BASIC ACCURACY OF 0.05%,THE MAXIMUM TEST FREQUENCY IS 100KHZ.IT IS EASY TO OPERATE WITH  240×64 dot-matrix LCD display ONLY IN CHINESE ,FUUL INTEGRATE LCR TRANSFORMER TEST FOUNCTION AND BALANCE TEST FOUNCTION GREATLY IMPROVE THE TEST 

LCR Meter HPS2810B

•  Basic accuracy: 0.1%
• Mathematical functions: Deviation and percent deviation
• Trigger Mode: Internal, manual and external
• Signal level: 0.1Vrms, 0.3Vrms, 1Vrms
• Display mode: Direct, Delta %, Delta ABS
• Comparator: NG, P1, P2, P3, AUX, 5 bins and alarm selectable

Technical Data

• Interface: RS232C, Handler
• Test parameter: L-Q, C-D, R-Q, |Z|-Q
• Test frequencies: 100Hz, 120Hz, 1kHz, 10kHz
• Fast measurement speed (80ms)
• Large LCD with backlight
• SMT surface mount technique
• 2 signal source output impedance: 30Ohm, 100Ohm
• Equivalents circuit: series, parallel
• Range mode: Auto, hold
• Measurement speed: 12meas/s, 5.1meas/s, 2.5meas/s
• Correction function: Open / Short multi-frequency zeroing
• Measurement terminals: 5
• Weight: 3.7Kg

Measurement ranges:

EFFECIENCY !