BRIFE INTRODUCTION

  PRESISION LCR Meter HPS8116
HPS8116 SERIES IS A NEW PRESISION LCR METER WITH 16 CHANNEL3 AND A 
HIGHER TEST FREQUENCY .THIS INSTRUMENT HAS A BASIC ACCURACY OF 0.05%,THE MAXIMUM TEST FREQUENCY IS 100KHZ.IT IS EASY TO OPERATE WITH  240×64 dot-matrix LCD display ONLY IN CHINESE ,FUUL INTEGRATE LCR TRANSFORMER TEST FOUNCTION AND BALANCE TEST FOUNCTION GREATLY IMPROVE THE TEST EFFECIENCY 

MAIN PARAMETERS

LCR Meter HPS2811C

Basic accuracy: 0.25%

Trigger Mode: Internal, manual and external

Signal level: 0.3Vrms, 1Vrms

Display mode: Direct

Highlights

LCR Meter HPS2811C

• Basic accuracy: 0.25%
• Trigger Mode: Internal, manual and external
• Signal level: 0.3Vrms, 1Vrms
• Display mode: Direct

Technical Data

• Test parameter: L-Q, C-D, R-Q, |Z|-Q
• Test frequencies: 100Hz, 120Hz, 1kHz, 10kHz
• Fast measurement speed (80ms)
• Large LCD with backlight
• SMT surface mount technique
• 2 signal source output impedance: 30Ohm, 100Ohm
• Equivalents circuit: series, parallel
• Range mode: Auto, hold
• Measurement speed: 12meas/s, 5.1meas/s, 2.5meas/s
• Correction function: Open / Short multi-frequency zeroing
• Measurement terminals: 5
• Power consumption: 20VA

Measurement ranges: