micro hot water dc water pump ZKSJ DC PUMP DC50G (China Manufacturer) - Pumps Vacuum Equipment - Machinery Products

micro hot water dc water pump ZKSJ DC PUMP DC50G

Model:	DC50G
Brand:	ZKSJ
Origin:	Made In China
Category:	Industrial Supplies / Machinery / Pumps Vacuum Equipment
Label:	micro dc pump , hot water pump , zksj dc pump
Price:	-
Min. Order:	-

Inquire Now

Product Description

DC50G Series

Product Appearance

Specifications

NO.	Item	Specs
1	Dimension and weight	99.4mmx92.5mmx69.6mm;480g
2	External diameter of outlet	1/2” thread(M20)
3	External diameter of inlet	1/2” thread(M20)
4	Driving mechanism	Brush-less, magnetic isolated design
5	Material of pump shell	ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6	Condition of use	Can continuously work, submersible or land use (not self-priming)
7	Suitable medium	Water, oil, or normal acid/ alkaline liquids (Pre-test needed for special liquid)
8	Max working temperature	60℃(for T sub-series) or 100℃(for S/A sub-series)
9	Power consumption	2.5W~48W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
10	Rated voltage	12Vdc or 24Vdc
11	Working voltage range	5Vdc ~ 14Vdc or 5Vdc ~ 26Vdc
12	Max load current	2.0A (for T sub-series) or 4.5A(for S/A sub-series)
13	Max horizontal flow rate	32L/MIN(for T sub-series) or 40L/MIN(for S/A sub-series)
14	Max static lift	4M(for T sub-series) or 8M(for S/A sub-series)
15	Noise class	IP68(suitable for submersible installation)
16	Waterproof class	Can be more than 30,000hrs
17	Life span	Can be suitable solar panel, batteries, adapter or other power source
18	Power supply	dry-run protection, lock protection(customized function)
19	Protection function	Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
20	Power regulation function	IP68(suitable for submersible installation)
22	Feature	small size with high efficiency,maintenance-free Use ceramics shaft and carbon fiber sleeve Completely water proof (IP68) Brush-less dc control without pollution, long life span OEM and ODM service accept Offer Pump related control system design

Pump Structure

Electrical parameters (only for reference，parameters can be customized for specific requirements)

Model No.	Voltage	Max load current	Max static lift	Max flow rate	Power consumption
	V(dc)	A	M	L/H	w
DC50G-1230T	12	2.0	3.0	1680	24
DC50G-1230S
DC50G-1230A
DC50G-1260S	12	4.5	6.0	2100	54
DC50G-1260A
DC50G-2440T	24	2.0	4.0	1920	48
DC50G-2440S
DC50G-2440A
DC50G-2480S	24	3.60	8.0	2400	86.4
DC50G-2480A
NOTE	Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids. When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current). The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head. The max flow rate means flow rate with no lifting height(according to the curve bellow)

Difference between 2phase & 3phase brushless DC pump

2phase
(T sub-series)

Hall sensor driving, circuit board should be placed inside pump body

3phase
(S/A sub-series)

NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply the same with common DC pump
Intelligent program-driving, sensor-less, circuit outside of pump body (main factor that pump can be high-temperature resistant)
Speed adjustable by PWM, 0~5V signal or potentiometer(optional)
Lock protection,reverse-connected protection, over-vol.&over-current protection,
Soft start, no current impact, can be contact directly with solar panel

Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.