Email: tina@aeo-cctv.com    skype:karlie@aeo-cctv.com   Tel:86-755-86276677

System Overview

HD Cascading Ring Network Fiber Optical Switch uses the design of industrial redundant ring net, and you can find two fiber ports which make up the ring net in every transmission equipment. The ring network topology structure is composed through hand in hand cascading, which can achieve no phase delay transmission of the 1080p HD network signals. The purpose of industrial redundant ring net design is to achieve the stability, reliability and instantaneity of the data transmission in a harsh environment. The working principle is that the network signals become ring structure in physical connection while chain structure during work. Once out of connection in the transmission optical cable, the device would switch to the spare line to transmit. The redundant ring net structure  not only reduces the risk of data signals transmission,but also simplifies the project installation and lowers the project costs.

Product Features

• Supporting all the network HD,SD cameras and other net signals;
• Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other internet protocol;
• Supporting the transmission pattern of full-duplex and half-duplex,with the ability of automated negotiation;
• Having the function of setting ring net in all the devices, and change transmission while the disconnection of the intermediate node;
• Supporting the transmission of the longest 1536 byte data package;
• Supporting POE on the network port;
• Providing the transmission of ultra low delayed data;
• Protecting from network broadcast radiation;
• Providing 2 or 4 set adaptive Ethernet port, which can link with internet camera, the switch and so on;
• Adapting parallel or cross-wire connection;
• Having APC circuit,with constant optical power output and wide dynamic range;
• 100Mbps optical fiber transmission,,with large capacity which could be upgraded easily;
• Having advanced adaptive technology,no field of the use of optical or electrical adjustment
• Adapting three-level lighting protection technology on the computer ports and network signals.

Product Description

● It automatically compatible with IEEE802.3, IEEE802.3U IEEE802.3X and other network protocols

● Support full duplex and half-duplex transmission mode, and with automatic negotiation ability

● Support any network HD, SD video cameras and other network signal

● Network interface: 4 ports of 10/100/1000 M Self-adaptive RJ 45 Port

●Transmission rate: 10/100/1000 Mbps    

● Optical interface: 2 x optical wavelength / single mode 1310 / 1550 nm.

● Delay: <9.6 μS

● BER: <1/1000000000

● Rated input voltage: DC 12 V ± 5%

● Power consumption: 5 W.

● Working environment: Temperature:  -40℃ ~ 85℃

● Dimension: 174 x 174 x 30 (mm)

● Weight: 540 g

Application diagram